Vertical Fiber Enclosure Dome type GJS03-M1AX-96C(with fiber basket),GJS03S-96C, FOSC 400 A4

Short Description:

This product is used to connect the distribution cable and the incoming cable, is widely applied in communication, network systems, CATV cable TV and so on. It adopts scientifically formulated engineering plastic and be shaped by injection molding, with anti-aging, anti-corrosion, flame retardant, waterproof, anti-vibration and anti-shock effects. Can effectively prevent the optic fibers from the influence of outdoor environment.
Dome-to-base design; up to 4 pieces splice trays, hinge for access of any splice without disturbing others trays; Fast and reliable sealing performance, easy to package multiple times. With lightning protection grounding device, it can be applied in overhead, wall mounting or directly buried.

FOB Price: US $0.5 - 9,999 / Piece

Min.Order Quantity: 100 Piece/Pieces

Supply Ability: 10000 Piece/Pieces per Month

Free sample Send email to us

Product Detail

Product Tags

Specifications

Model		GJS03-M1AX- 96-***
Size:With clamp’s biggest outer dia.	422.3*219.2 mm	Raw material	Dome, Base： modified PP, clamp：Nylon +GFTray: ABSMetal parts：Stainless steel
Entry ports number:	1 oval port，4 round ports	Available cable dia.	Oval port：available for 2 pcs, 10~29mm cablesRound ports：Each available for 1pc 6-24mm cable
Max. tray number	4 trays	Base sealing method	Heat-shrink
Tray capacity	24F	Applications	Aerial, directly buried, Wall/pole mounting
Max. closure splice capacity	96F	IP grade	68

Order Guidance

Exterior Structure Diagram

Technical Parameter

1. Working Temperature: -40 degrees centigrade~+65 degrees centigrade
2. Atmospheric Pressure: 62~106Kpa
3. Axial Tension: >1000N/1min
4. Flatten Resistance: 2000N/100 mm (1min)
5. Insulation resistance: >2*104MΩ
6. Voltage Strength: 15KV(DC)/1min, no arc over or breakdown
7. Temperature recycle: under -40℃~+65℃，with 60(+5)Kpa inner pressure, in 10cycles; Inner pressure shall decrease less than 5 Kpa when closure turn to normal temperature.
8. Durability：25 years

Main Components

Name	Qty	Picture		Name		Qty		Picture
Dome	1pc			Tray		Max.4 pcsoptional		RQP-06-24c middle splice
								RQP-08-24c side splice
Clamp	1pc			Valve		1		optional
Base	1pc			Modified O-ring		1
Cable Strengthen member attach plate	1set			Velcro strip with one X flake		1
optic joints protection tube	Max. 96			Ground feed-through lug		1	optional
Metal Storage basket	1 standard offered			Plastic storage basket		1Orderd as optional
Nylon tie & Transparent PE tube	8pcs/bag	Each two trays with 1 bag.
Wall mounting kits	1Standard offered with
Aerial mounting kits	Order as optional
Pole mounting kits	Order as optional
Round Port accessories bag	1 bag		Items		Heat-shrink tube		4
					Abrasive tape		1
					Aluminium foil		4
Oval port accessories bag	1bag		Items		Heat-shrink tube		1
					Abrasive tape		1
					Aluminium foil		2
					Cleaning tissue		1		optional
					Desiccant		1		optional
					Shield continuity wire		1		optional
					AMP clamp		1		optional
					Branch off clip		1

Installation Guidance

1. Cut the ports need to guide-in cable

2. Put the cable through the heat-shrink tube

3. Remove the sheath of the cable and clean it. Cut the strengthen member to 5cm length. Put it through the attach screws and bend it to fix on the screw. Then tighten the screw.

4. Remove the loose tube of the cable and clean the bare fibers. Put them through the transparent PE tube. Using PVC tape to wrap the end of the PE tube and cable.

5. Wind the excessive loose buffers in suitable cycles and put in the storage basket.

6. Coiling the optic fibers in the splice trays as above picture from the bottom tray to the top one. Fusion the joints and shrink the protective tubes and fix them in the tray. And put on the tray lid.

7. Use the Velcro strip to bind the trays.

8.Using abrasive strip to rough the surface of the cable sheath and ports slightly.

9. Clean the cable surface and ports

10. Move the heat-shrink tube to cover the base port and the cable. Mark the tube end on the cable and stick the aluminum film on it. The blue line of the film shall at the same position of the marked place. ( Edge which close to the blue line shall be in the tube. Other side out of the tube.) Using blunt tool to even the film tightly stick to the cable. Heat the tube to shrink to seal from the direction of the red arrow slowly. (If to guide 2 cables in the oval port, use branch off clips to separate the cables , heat the branch off clip at meantime to seal the space.)