搜索

产品详情 全部 通信 终端和服务器 Telecommunication GP01-H62 In-Line Horizontal Fiber Optic Splice Closure The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight-through splicing and divergence and other trunk fiber optic cable and common fiber optic cable network splicing. The use of double-ended horizontal design structure, with box internal residual fiber inventory space, can be placed directly fusion fiber bracket structure; The product has a high strength mechanical performance, high sealing performance, corrosion resistance, excellent weather resistance, etc., multi-cable port management, can be mechanically repeated to open; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable joint splicing, can be used for metropolitan area network backbone, urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is produced by injection molding process of high-quality engineering plastics, with anti-UV and anti-aging additives, high mechanical strength; 2、The box adopts double-ended optical cable in and out design structure, convenient overhead hanging rod and other openable structure; 3、the box body box cover using non-vulcanized rubber sealing structure, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、high-capacity splicing, to meet the trunk or special fiber optic cable splicing protection; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+70℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 60 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+70℃, internal air pressure 60(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 37.5mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure, hexagonal wrench. 点击下载产品手册 相关产品 主图1.jpg 主图2.jpg 主图7.jpg 主图1.jpg 1/7 In-Line Horizontal Fiber Optic Splice Closure GP01-H63 主图1.jpg 主图2.jpg 主图8.jpg 主图1.jpg 1/8 In-Line Horizontal Fiber Optic Splice Closure GP01-H61 主图1.jpg 主图2.jpg 主图7jpg.jpg 主图1.jpg 1/7 In-Line Horizontal Fiber Optic Splice Closure GP01-H60 主图1.jpg 主图2.jpg 主图7.jpg 主图1.jpg 1/7 In-Line Horizontal Fiber Optic Splice Closure GP01-H55

请检查您的链接是否正确或联系我司人员 回到前宏主页

产品详情 全部 通信 终端和服务器 Telecommunication Fiber optic splitter box Sheet Metal Fiber optic splitter box is a product developed and designed for different scenarios such as primary splitting or secondary splitting in FTTH construction, which is mostly used for wiring fiber optic cable to connect with incoming fiber optic cable through optical splitter to meet the demand of user's high rate bandwidth service opening, and is an important optical access equipment in ODN network. Fiber optic splitter box is used for outdoor, building or indoor connection trunk cable and wiring cable interface equipment, by the cable stripping fixed components, fusion module, storage area, etc., to complete the introduction of fixed fiber optic cable, fiber fusion wiring, installation management, leather cable inventory, fixed and fusion. The outdoor type can be wall-mounted or pole-mounted, and the indoor type can be wall-mounted in the building or weak well. Suitable for fiber optic access network wiring fiber optic cable and the home skin cable junction use, the box adopts the wall hanging or holding pole installation method, suitable for indoor and outdoor two scenarios: through SC, FC, LC type fiber adapter and fast connectors to connect and dispatch between the external armored fiber optic cable and the home skin cable. Product Benefits Non-metallic splitting and distribution box: (1) The box is made of high quality ABS, with high mechanical strength, solid wear resistance and long life; (2) The box can be installed in a variety of ways, according to the construction site, the role of different, using wall hanging, embedded wall or holding the pole installation, indoor and outdoor can be used. (3) Fully enclosed structure, moisture-proof, water-proof, dust-proof, anti-corrosion and anti-aging performance, outdoor type box protection grade IP55, indoor type box protection grade IP53. (4) Beautiful and generous appearance, suitable for most occasions. (5) Factory-made pigtails for high quality and low cost installation with less field fusion. (6) SC, FC, and LC adapters are available upon request. (7) A variety of box specifications models to choose from, a variety of sizes, suitable for a variety of scenes construction and installation. Metal splitting and distribution box: (1) The box body is made of high-quality cold-rolled steel plate, galvanized steel plate, stainless steel plate, and the surface of the box body adopts electrostatic spraying process, which has superior dustproof, anti-corrosion and aging resistance, and high safety performance; (2) The box can be installed in a variety of ways, according to the construction site, the role of different, using wall hanging, embedded wall or holding the pole installation, indoor and outdoor can be used. (3) Fully enclosed structure, moisture-proof, water-proof, dust-proof, anti-corrosion and anti-aging performance, outdoor type box protection grade IP55, indoor type box protection grade IP53. (4) Factory-made pigtails for high quality and low cost installation with less field fusion. (5) Beautiful and generous appearance, suitable for most occasions. (6) SC, FC, and LC adapters are available upon request. (7) A variety of box specifications models to choose from, a variety of sizes, suitable for a variety of scenes construction and installation. Product Type According to the different materials of the box, it can be divided into ABS plastic box and metal box. Product usage It is suitable for indoor and building to connect the introduction of fiber optic cable and butterfly cable or connect the vertical fiber optic cable and horizontal fiber optic cable in the building interface equipment. Fiber optic distribution box contains fiber optic cable terminal, fiber fusion or mechanical splicing protection unit, wall-mounted. Product application tools Optical fiber splitting box construction, the need to use to the tools are: fusion fiber machine, alcohol, power meter, anhydrous ethanol, OTDR tester, pigtail, dissecting pliers, fiber cutting knife, oblique pliers, horizontal ruler, impact drill, screwdriver, bellows, yellow tape, black tape, soft plastic tape, ring knife, fire clay, tin pliers, optical power meter, pen red light source, etc. Frequently Asked Questions Is it possible to customize the size of the equipment other than the above? Yes, we can design and produce according to the customer's requirements, or we can extend on the original basis. Is it harmful to have fiber optic splitter boxes at the door? Because this fiber optic splitter box is only some just splitter wiring port, and not too much power, naturally there will not be too much radiation, there is no harm to our human body. And this fiber optic distribution box is generally installed in the outdoor door, indoor and outdoor with the wall between this obstacle, will not bring any harm to everyone. Is there a flame retardant solution? Non-metallic material parts have the ability to resist corrosion and aging, non-metallic material parts (including insulated wire, cable and foam) for extended combustion materials, and their combustion properties can meet the requirements of flame retardant test. The difference between optical splitter box and optical splitter box? Optical splitter box: generally refers to the optical fiber splitter box, optical fiber splitter box is used for outdoor, building or indoor connection of the backbone cable and wiring fiber optic cable interface equipment. Optical splitter box: is one of the important passive components of the fiber optic link, is a fiber optic convergence device with multiple inputs and multiple outputs. 点击下载产品手册 相关产品 1/2 Sheet Metal Traditional fiber optic cable transfer box 主图1.jpg 主图2.jpg 主图6.jpg 主图1.jpg 1/17 Sheet Metal Fiber optic cable termination box 1/1 Sheet Metal All-in-one fusion tray 1/2 Sheet Metal No-jump fiber optic cable transfer box

产品详情 全部 通信 终端和服务器 通信 GJS03-M9AX-JX-288C-SRZJ21-W12(GP1425) 帽式光缆接头盒, M9 该产品适用于室外光缆架空、管道等直通接续和分歧接续。 本产品具有高强度机械性能、高密封性能、耐腐蚀性强、耐候性优异等特点，可机械重复开启，可维护性高；结构布局合理，施工操作简单快捷。 应用场景 室外架空、管道、直埋等普通光缆接头接续，可用于城区或城乡普通光纤网络接续保护。 结构图 性能特点： 1、壳体采用优质工程塑料注塑工艺生产、添加有抗紫外线、耐老化助剂，机械强度高； 2、盒体采用单端进出光缆设计结构、便于架空挂杆等安装且筒体可快速开启进行检修和维护；开启盒体无须工具； 3、壳体与底部采用硅橡胶密封圈、光缆口利用耐温热缩管密封，气密性良好； 4、盒体具备电气断开或连通功能，可选配气嘴； 5、大容量接续，满足干线或特种光缆接续保护； 7、防白蚁、耐酸碱油、抗极寒和高温环境需订货单独说明。 技术参数 1、适应环境温度：-20℃~+65℃。 2、大气压力：70~106Kpa。 3、轴向拉力：〉8000N/1min以上。 4、压扁：盒内充入40±5kpa气压，应能承受2000N/100mm横向均布压力，加力时间不小于1ｍｉｎ，试验后接头盒不漏气、无变形、无损伤。 5、冲击：光缆接头盒应能承受落高1m、钢球质量1.0Kg，冲击次数为3次的冲击。 6、弯曲：光缆接头盒与光缆接合处应能承受弯曲张力负荷为150N、弯曲角度±45°的10个循环的弯曲。 7、扭转：光缆接头盒应能承受扭矩不小于50N·m，扭转角度±90°，共10次循环的扭转。 8、跌落：光缆接头盒应能承受2m高度3次的跌落，试验后接头盒不漏气、无变形、无损伤。 9、抗拉力：〉1000N/10cm2压力，时间1min。 10、震动：接头盒承受振动频率为10Hz、振幅为±3mm、振动次数为106的振动，其光纤附加损耗变化值不超过0.2dB; 11、温度循环：-20℃~+65℃，内部气压40(+5)Kpa,循环次数10次， 常温后气压下降不超过5kpa。 12、光纤曲率半径>30mm,光纤熔接盘附加衰耗≤0.01dB。 施工常用工具 十字改刀、热风机或喷枪、锯工、卷尺。 参数表 型号：GJS03-M9AX-JX-288C-SRZJ21-W12(GP1425) 盒体材质：PP 适应光缆直径椭圆孔：10-25mm 小孔：6-20mm 入缆口数：2+6 熔纤盘最大容量(芯）：24 最大熔接芯数(芯）：288 光纤余纤收容装置：是 密封方式：机械 光纤成端类型及数量：--- 产品使用环境：架空、管道、地埋 点击下载产品手册 相关产品 主图1.jpg 主图2.jpg 主图6.jpg 主图1.jpg 1/6 帽式光缆接头盒, M9 GJS03-M9AX-RS-288C-SRZJ21-W12(GP1423) 主图1.jpg 主图2.jpg 主图5.jpg 主图1.jpg 1/5 帽式光缆接头盒, M9 GJS03-M9AX-24~144C(GP317)

产品详情 全部 通信 终端和服务器 Telecommunication GP01-H40 In-Line Horizontal Fiber Optic Splice Closure The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight-through splicing and divergence and other trunk fiber optic cable and common fiber optic cable network splicing. Double-ended horizontal design structure, the product has high strength mechanical performance, high sealing performance, corrosion resistance, excellent weather resistance, etc., multi-cable port management, can be mechanically repeated to open; reasonable structure layout, construction operation is simple and fast. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable splice splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is produced by injection molding process of high-quality engineering plastics, with anti-UV and anti-aging additives, high mechanical strength; 2、The box adopts double-ended optical cable in and out design structure, convenient overhead hanging rod and other openable structure; 3、the box body box cover using non-vulcanized rubber sealing structure, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、high-capacity splicing, to meet the trunk or special fiber optic cable splicing protection; 6、The box adopts the layout design of 4-in and 4-out optical cable ports to meet the management of up to 6 optical cables access; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 60 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 60(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 37.5mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure, hexagonal wrench. 点击下载产品手册 相关产品 主图1.jpg 主图2.jpg 主图7.jpg 主图1.jpg 1/7 In-Line Horizontal Fiber Optic Splice Closure GP01-H63 主图1.jpg 主图2.jpg 主图8.jpg 主图1.jpg 1/8 In-Line Horizontal Fiber Optic Splice Closure GP01-H61 主图1.jpg 主图2.jpg 主图7jpg.jpg 主图1.jpg 1/7 In-Line Horizontal Fiber Optic Splice Closure GP01-H60 主图1.jpg 主图2.jpg 主图7.jpg 主图1.jpg 1/7 In-Line Horizontal Fiber Optic Splice Closure GP01-H55

请检查您的链接是否正确或联系我司人员 回到前宏主页

产品详情 全部 通信 终端和服务器 通信 GJS03-M8AX-12~144C（GP313） 帽式光缆接头盒, M8 该产品适用于室外光缆架空、管道等直通接续和分歧接续。 本产品具有高强度机械性能、高密封性能、耐腐蚀性强、耐候性优异等特点，可机械重复开启，可维护性高；结构布局合理，施工操作简单快捷。 应用场景 室外架空、管道、直埋等普通光缆接头接续，可用于城区或城乡普通光纤网络接续保护。 结构图 性能特点： 1、壳体采用优质工程塑料注塑工艺生产、添加有抗紫外线、耐老化助剂，机械强度高； 2、盒体采用单端进出光缆设计结构、便于架空挂杆等安装且筒体可快速开启进行检修和维护；开启盒体无须工具； 3、壳体与底部采用硅橡胶密封圈、光缆口利用耐温热缩管密封，气密性良好； 4、盒体具备电气断开或连通功能，可选配气嘴； 5、大容量接续，满足干线或特种光缆接续保护； 7、防白蚁、耐酸碱油、抗极寒和高温环境需订货单独说明。 技术参数 1、适应环境温度：-20℃~+65℃。 2、大气压力：70~106Kpa。 3、轴向拉力：〉8000N/1min以上。 4、压扁：盒内充入40±5kpa气压，应能承受2000N/100mm横向均布压力，加力时间不小于1ｍｉｎ，试验后接头盒不漏气、无变形、无损伤。 5、冲击：光缆接头盒应能承受落高1m、钢球质量1.0Kg，冲击次数为3次的冲击。 6、弯曲：光缆接头盒与光缆接合处应能承受弯曲张力负荷为150N、弯曲角度±45°的10个循环的弯曲。 7、扭转：光缆接头盒应能承受扭矩不小于50N·m，扭转角度±90°，共10次循环的扭转。 8、跌落：光缆接头盒应能承受2m高度3次的跌落，试验后接头盒不漏气、无变形、无损伤。 9、抗拉力：〉1000N/10cm2压力，时间1min。 10、震动：接头盒承受振动频率为10Hz、振幅为±3mm、振动次数为106的振动，其光纤附加损耗变化值不超过0.2dB; 11、温度循环：-20℃~+65℃，内部气压40(+5)Kpa,循环次数10次， 常温后气压下降不超过5kpa。 12、光纤曲率半径>30mm,光纤熔接盘附加衰耗≤0.01dB。 施工常用工具 十字改刀、热风机或喷枪、锯工、卷尺。 参数表 型号：GJS03-M8AX-12~144C（GP313） 盒体材质：PP 适应光缆直径：椭圆孔：10-25mm；小孔：6-25mm 入缆口数：2+4 熔纤盘最大容量(芯）：24 最大熔接芯数(芯）：144 光纤余纤收容装置：是 密封方式：机械+热缩密封 光纤成端类型及数量：--- 产品使用环境：架空、管道、地埋 点击下载产品手册 相关产品 主图1.jpg 主图2.jpg 主图5.jpg 主图1.jpg 1/5 帽式光缆接头盒, M8 GJS03-M8AX-JX-24~144(GP322)

产品详情 全部 通信 终端和服务器 Telecommunication GJSO3-M1AX-SC-24 24~48C(GP294) Dome Fiber Optic Splice Closure, M 1 The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight splicing and divergence splicing, and with fiber into the end and fiber jumping device; the product has high strength mechanical properties, high sealing performance, corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、 with fiber into the end and patching, the number of ports: maximum 24 cores; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、 flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、 bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、 vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M1AX-144C(GP200) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 6-25mm Number of cable entry ports: 2+4 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: No Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 点击下载产品手册 相关产品 主图1.jpg 主图2.jpg 主图3.jpg 主图1.jpg 1/3 Dome Fiber Optic Splice Closure, M 1 GJS03-M1AX-A8-144C-W30(GP1416) 主图1.jpg 主图2.jpg 主图3.jpg 主图1.jpg 1/3 Dome Fiber Optic Splice Closure, M 1 GJS03-M1AX-A8,SC-24 24-72C-D(GP297) 主图1.jpg 主图2.jpg 主图3.jpg 主图1.jpg 1/3 Dome Fiber Optic Splice Closure, M 1 GJS03-M1AX-A8-24-96C-N08(GP218) 主图1.jpg 主图2.jpg 主图4.jpg 主图1.jpg 1/4 Dome Fiber Optic Splice Closure, M 1 GJS03-M1AX-A8-24~96C(GP204)

请检查您的链接是否正确或联系我司人员 回到前宏主页

请检查您的链接是否正确或联系我司人员 回到前宏主页