搜索

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 M5AX-RS-AL-SC(48) 12~144C(GP220) The product is suitable for outdoor large-capacity fiber optic cable overhead, pipeline and other straight-through splicing and divergent splicing, the product has high strength mechanical properties, high sealing performance, strong corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable splice splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts the single end in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; open the box body without tools; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、high-capacity splicing, to meet the trunk or special fiber optic cable splicing protection; 6、with fiber into the end of the patch function; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M4AX-AL-12-672C(GP321) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 8-30mm Number of cable entry ports: 2+16 Maximum capacity of fusion fiber tray (core): 12 Maximum number of fusion cores (cores): 672 Fiber optic residual fiber intake device: Yes Sealing method: mechanical + heat shrink seal Fiber into the end type and the number of - Product use environment: overhead, pipeline, buried 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GJS03-M5AX-RS-AL-288C(GP304) The product is suitable for outdoor large-capacity fiber optic cable overhead, pipeline and other straight-through splicing and divergent splicing, the product has high strength mechanical properties, high sealing performance, strong corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable splice splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、Anti-termites, acid and alkali resistant oil, resistance to extreme cold and high temperature environments need to be specified separately in the order. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M4AX-AL-12-672C(GP321) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 8-30mm Number of cable entry ports: 2+16 Maximum capacity of fusion fiber tray (core): 12 Maximum number of fusion cores (cores): 672 Fiber optic residual fiber intake device: Yes Sealing method: mechanical + heat shrink seal Fiber into the end type and the number of - Product use environment: overhead, pipeline, buried 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GJS03-M2AX-A8-24~96C-N08(GP241) The product is suitable for outdoor optical cable overhead, pipeline and other straight-through splicing and divergence splicing, optical cable to meet the multi-divergence 2 into 8 out optical cable port management. The product has high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、Multi-divergent structure design with 2-in and 8-out multi-optical cable management; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M1AX-144C(GP200) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 6-25mm Number of cable entry ports: 2+4 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: No Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GJS03-M1AX-A8-144C-W30(GP1416) The product is suitable for outdoor optical cable overhead, pipeline and other straight-through splicing and divergence splicing, optical cable to meet the multi-divergence 2 into 8 out optical cable port management. The product has high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable splice splicing, can be used for metropolitan area network backbone, urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts the single end in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; open the box body without tools; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、Multi-divergent structure design with 2-in and 8-out multi-optical cable management; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M1AX-144C(GP200) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 6-25mm Number of cable entry ports: 2+4 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: No Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 上一个产品 下一个产品

产品详情 全部 通信 终端和服务器 Telecommunication GJS03-M10AX-JX-432C(GP318) Dome Fiber Optic Splice Closure, M 10 The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight-through splicing and divergence splicing. The product has the characteristics of high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc. It can be mechanically repeatedly opened, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、high-capacity splicing, to meet the trunk or special fiber optic cable splicing protection; 7、 termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure. Parameter table Model: GJS03-M10AX-JX-432C(GP318) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 6-20mm Number of cable entry ports: 2+8 Maximum capacity of fusion fiber tray (core): 24 Maximum fusion core (core): 432 (12-core ribbon) Fiber optic residual fiber intake device: Yes Sealing method: Mechanical Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 点击下载产品手册 相关产品 主图1.jpg 主图2.jpg 主图5.jpg 主图1.jpg 1/5 Dome Fiber Optic Splice Closure, M 10 GJS03-M10AX-RS-432C-N14(GP367) 主图1.jpg 主图2.jpg 主图4.jpg 主图1.jpg 1/4 Dome Fiber Optic Splice Closure, M 10 GJS03-M10AX-RS-288C-SRZJ-21 主图1.jpg 主图2.jpg 主图6.jpg 主图1.jpg 1/6 Dome Fiber Optic Splice Closure, M 10 GJS03-M10AX-JX-24~288C-SRZJ-21

产品详情 全部 通信 终端和服务器 Telecommunication GP01-H43 In-Line Horizontal Fiber Optic Splice Closure The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight-through splicing and divergence and other trunk fiber optic cable and common fiber optic cable network splicing. Double-ended horizontal design structure, the product has high strength mechanical performance, high sealing performance, corrosion resistance, excellent weather resistance, etc., multi-cable port management, can be mechanically repeated to open; reasonable structure layout, construction operation is simple and fast. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable joint splicing, can be used for metropolitan area network backbone, urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box adopts double-ended optical cable in and out design structure, convenient overhead hanging rod and other openable structure; 3、the box body box cover using non-vulcanized rubber sealing structure, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、high-capacity splicing, to meet the trunk or special fiber optic cable splicing protection; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 60 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 60(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 37.5mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure. 点击下载产品手册 相关产品 主图1.jpg 主图2.jpg 主图7.jpg 主图1.jpg 1/7 In-Line Horizontal Fiber Optic Splice Closure GP01-H63 主图1.jpg 主图2.jpg 主图8.jpg 主图1.jpg 1/8 In-Line Horizontal Fiber Optic Splice Closure GP01-H61 主图1.jpg 主图2.jpg 主图7jpg.jpg 主图1.jpg 1/7 In-Line Horizontal Fiber Optic Splice Closure GP01-H60 主图1.jpg 主图2.jpg 主图7.jpg 主图1.jpg 1/7 In-Line Horizontal Fiber Optic Splice Closure GP01-H55

产品详情 全部 通信 终端和服务器 通信 GJS03-M1AX-JX-144C(GP335) 帽式光缆接头盒, M1 该产品适用于室外光缆架空、管道等直通接续和分歧接续，本产品具有高强度机械性能、高密封性能、耐腐蚀性强、耐候性优异等特点，可机械重复开启，可维护性高；结构布局合理，施工操作简单快捷。 应用场景 室外架空、管道等普通光缆接头接续，可用于城区或城乡普通光纤网络接续保护。 结构图 性能特点： 1、壳体采用优质工程塑料注塑工艺生产、添加有抗紫外线、耐老化助剂，机械强度高； 2、盒体采用单端进出光缆设计结构、便于架空挂杆等安装且筒体可快速开启进行检修和维护；开启盒体无须工具； 3、壳体与底部采用硅橡胶密封圈、光缆口利用耐温热缩管密封，气密性良好； 4、盒体具备电气断开或连通功能，可选配气嘴； 5、体积小巧，在管道或狭小空间更加适用； 6、防白蚁、耐酸碱油、抗极寒和高温环境需订货单独说明。 技术参数 1、适应环境温度：-40℃~+65℃。 2、大气压力：70~106Kpa。 3、轴向拉力：〉1000N/1min以上。 4、压扁：盒内充入40±5kpa气压，应能承受2000N/100mm横向均布压力，加力时间不小于1ｍｉｎ，试验后接头盒不漏气、无变形、无损伤。 5、冲击：光缆接头盒应能承受落高1m、钢球质量1.6Kg，冲击次数为3次的冲击。 6、弯曲：光缆接头盒与光缆接合处应能承受弯曲张力负荷为150N、弯曲角度±45°的10个循环的弯曲。 7、扭转：光缆接头盒应能承受扭矩不小于50N·m，扭转角度±90°，共10次循环的扭转。 8、跌落：光缆接头盒应能承受2.2m高度3次的跌落，试验后接头盒不漏气、无变形、无损伤。 9、抗拉力：〉2000N/10cm2压力，时间1min。 10、震动：接头盒承受振动频率为10Hz、振幅为±3mm、振动次数为106的振动，其光纤附加损耗变化值不超过0.2dB; 11、温度循环：-40℃~+65℃，内部气压40(+5)Kpa,循环次数10次， 常温后气压下降不超过5kpa。 12、光纤曲率半径>30mm,光纤熔接盘附加衰耗≤0.01dB。 施工常用工具 十字改刀、锯工、卷尺。 参数表 型号：GJS03-M1AX-JX-144C(GP335) 盒体材质：PP 适应光缆直径：椭圆孔：10-25mm；小孔：6-25mm 入缆口数：2+4 熔纤盘最大容量(芯）：24 最大熔接芯数(芯）：144 光纤余纤收容装置：否 密封方式：机械密封 光纤成端类型及数量：--- 产品使用环境：架空、管道、地埋 点击下载产品手册 相关产品 主图1.jpg 主图2.jpg 主图3.jpg 主图1.jpg 1/3 帽式光缆接头盒, M1 GJS03-M1AX-A8-144C-W30(GP1416) 主图1.jpg 主图2.jpg 主图3.jpg 主图1.jpg 1/3 帽式光缆接头盒, M1 GJS03-M1AX-A8，SC-24 24-72C-D(GP297) 主图1.jpg 主图2.jpg 主图3.jpg 主图1.jpg 1/3 帽式光缆接头盒, M1 GJS03-M1AX-A8-24-96C-N08(GP218) 主图1.jpg 主图2.jpg 主图4.jpg 主图1.jpg 1/4 帽式光缆接头盒, M1 GJS03-M1AX-A8-24~96C(GP204)

产品详情 全部 通信 终端和服务器 Telecommunication Medium wall thickness heat shrinkable round tube series Shrinkable Round Tube Medium wall heat shrinkable round tube is produced from cross-linked polyethylene material through melt extrusion, irradiation, expansion, glue coating and other processing, with excellent insulation, high strength, strong resistance to environmental corrosion, radiation resistance, aging resistance, etc., high shrinkage times ratio, a wide range of applicable scenes. Application Scenarios 1、Mainly used in the insulation protection of terminals or intermediate joints of medium and low-voltage power cables, insulation protection of various busbars; 2, communication cable joint protection and optical cable joint box sealing protection. Performance Features 1、Starting shrinkage temperature: ≥ +70℃ 2、Complete shrinkage temperature: ≥ +125℃ 3、Use temperature: -45℃~+110℃ 4、UV resistance, wear-resistant 5、Environmental standards: RoHS 6、Heat shrinkage ratio: >3:1 7、Standard color: black (other colors can be customized) Technical parameters Performance Indicators Test Methods Tensile strength ≥ 12 Mpa ASTM D 2671 Elongation at break ≥300% ASTM D 2671 Strength after aging ≥ 8.4 Mpa 158℃×168h Elongation at break after aging ≥200% 158℃×168h Axial variation rate -8%~+8% ASTM D 2671 Breakdown strength ≥20kV/mm IEC 60243 Volume resistivity ≥1014 Ω-cm IEC 60093 Mmonly used tools for construction tape measure, flame gun or hot air gun. Parameters table 点击下载产品手册 相关产品

产品详情 全部 通信 终端和服务器 终端和服务器 电动车抓拍摄像机QH-ESG201-PI AI类摄像机 ​ 主要卖点 (1) 全高清30fps高帧率图像输出 (2) 内嵌智能深度学习电动车检测算法 (3) 内置烟雾传感器，支持烟雾识别后联动报警并上传平台，并进行声音告警 (4) 经过各项严格测试的国标标准产品 各项主要参数指标 产品关键参数 点击下载产品手册 相关产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 Outdoor cabinet-Three compartment integrated cabinet The three-compartment integrated cabinet for base stations is a special cabinet that provides installation space and uninterrupted power supply for communication base stations and their related equipment. The BBU and RRU are connected by optical fiber according to the agreement to complete the transmission of baseband data, so as to realize the function of "centralized BBU setting and remote RRU coverage" when the network is deployed, and to unify the management and dynamic allocation of its coverage area to improve the utilization of resources and reduce energy consumption, and to improve the network performance by effectively supporting the assistance technology, configuring the backbone fiber optic cable connection, fully integrating the advantages of transmission network and access network resources through fiber optic resource connection and allocation, and building the 5G network architecture of fixed-mobile convergence. The cabinet can serve multiple base stations, microstations and connect the next three-compartment cabinet to form a ring optical transmission network, providing flexible and distributed network connections for various wireless outlets, mainly used in 5G backbone network nodes, transmission network integrated service It is mainly used in the construction and maintenance of 5G backbone network nodes and transmission network integrated service area, and provides a complete set of temperature control solutions for the whole product, which is safe and reliable, strong anti-theft performance, low noise, good heat dissipation, small space occupation, etc. It can help customers realize rapid site selection and station construction, rapid deployment, and greatly enhance the comprehensive service capability of communication system platform upgrade support. Product Benefits (1) Small and integrated: product dimensions H*W*D: 2200*2200*1200, covers an area of about 2.65m2) (2) Modular design: with high reliability, simple maintenance, flexible combination according to the different needs of customers (3) Centralization: It can greatly reduce the number of server rooms, thus reducing the construction and operation and maintenance costs and realizing the effective sharing of supporting resources (4) Safety: reliable power supply and distribution system and backup battery, dynamic loop control and monitoring system to ensure the safety of equipment operation (5) Energy saving: large savings in base station air conditioning and supporting facilities, reducing energy consumption and emissions, and reducing the high energy consumption caused by a large number of base stations (6) Collaboration: Reduce inter-base station interference, improve cell edge coverage, provide higher spectral efficiency and better user experience (7) Virtualization: Common platform-based wireless, access network architecture centralized resources, multi-mode operation (8) Support multi-scene, multi-functional applications (rooftop stations, street stations, suburban stations, operator co-stations, etc.) (9) Made of high quality hot galvanized sheet plus flame retardant material, good heat insulation (PU core not less than 45MM), outdoor waterproof grade IP55 (10) Choose the point to build a low cost site can be built with OCC integration (11) High compatibility, can support a variety of devices and battery installation Product Type Integrated three-compartment integrated cabinet is a comprehensive product, the product integrates the traditional server room business and OCC business, the product has integrated the associated functions, in the absence of special requirements, please choose the company's recommended product specifications type. Product use (1) Cabinet installation and fixing function: can install and fix IT equipment, servers and other equipment and batteries, the main fixing method of equipment is 19-inch rack mounting, fixed on the U system column, the main frame of the cabinet and U system column design is convenient to install equipment, and the load-bearing capacity is relatively strong, so the cabinet can be installed in all standard equipment, the battery can support direct discharge or 19-inch rack mounting, and can carry out related at the same time OCC business, can support fiber optic cable fusion wiring can also achieve the jumper function (2) Cabinet line management function: the cabinet has a variety of internal line management slot, line management frame, line management board and alignment channel, etc., to provide a very convenient wiring management for a variety of equipment installed inside the cabinet (3) Cabinet protection function: the cabinet is a relatively closed space, the cabinet door can be closed to the internal equipment to play a protective role to prevent damage from the outside, such as rats can be prevented from entering the cabinet inside the equipment or cable into the line damage (4) The cabinet can integrate UPS power supply, power distribution, refrigeration, access control, cabinets, lighting, fire protection, dynamic monitoring, emergency ventilation, OCC and other systems, through the monitoring system to complete the integrated management of all subsystems (5) Provide reliable temperature control and regulation system for the full and stable operation of communication transmission equipment (6) Provide reliable grounding protection system for communication transmission equipment and cabinets Product application tools Integrated three-compartment integrated cabinet can be fully applied to business outlets (telecommunications, finance, energy, radio and television, retail) small businesses, large enterprises, government, education, medical branches and networks between the edge of the data center, the use of tools need to be applied to: fusion machine, fiber optic cutting knife, fiber tester, pen red light source, optical power meter, dissecting pliers, diagonal pliers, screwdriver, the need to prepare the construction materials There are: anhydrous ethanol, adhesive tape, flexible plastic tape, fireproof mud, corrugated pipe, etc. Frequently Asked Questions Do you support non-standard product customization in addition to the above equipment sizes? In principle, this three-compartment integrated cabinet is recommended to use the existing size of the company, because after a long period of testing and use verification, the standard configuration of the three-compartment cabinet can fully meet the relevant business development, such as customers have other special requirements can also support special customization. What is the difference between an integrated three-compartment cabinet and a traditional cabinet? All-in-one cabinet will be a deep integration of data center infrastructure equipment products, including UPS, power distribution, refrigeration, cabinets, fire protection and other subsystems, through the monitoring system to complete the overall management of all systems, simplifying the design and establishment process, reliable UPS power distribution system, from time to time for IT equipment protection, while configured with a precision cooling system to ensure normal operation of IT equipment, with dynamic loop monitoring The system monitors the working status of the equipment in real time. Integrated cabinet with fully sealed design, can be applied in a variety of harsh indoor environments, without separate set of rooms, for special sites can choose integrated cabinets, equipment and batteries in the same cabinet, the equipment work separately, each zone separate temperature control, on this basis can also carry out OCC business, without separate site selection and construction of related sites, business can also be interrelated depth of integration. What are the advantages of an all-in-one cabinet? (1) Compared with traditional server room, integrated server room structure is simpler, factory pre-verification test is more standardized, safe and reliable compared with on-site construction; fully sealed design to eliminate the outside air dust and corrosive gases on IT equipment; dynamic loop monitoring system to monitor the infrastructure in a comprehensive manner, timely alarm abnormal conditions, security and worry-free. (2) More time-saving and labor-saving construction of the site, the modular design of the product allows the site to be installed and delivered within a day, more than 2 times faster than the traditional construction mode. (3) smaller footprint, a single cabinet covers an area of only 2.65 square meters, closed design, strong environmental adaptability, no decoration, flooring and other supporting works, effectively reducing the cost of building the station, fully enclosed refrigeration to enhance the energy efficiency of the whole machine, so that the overall cost of ownership significantly reduced. (4) better management, one-stop after-sales service can deal with all kinds of equipment failure problems in a timely manner, saving time and effort; standard with dynamic loop monitoring system, local, remote monitoring and management, more multi-network access to the upper management platform unified supervision, diversified options to support. (5) Integrated and integrated design, integrated cabinet integration of UPS power supply, power distribution, refrigeration, access control, cabinets, lighting, fire, dynamic monitoring, emergency ventilation and many other systems, through the monitoring system to achieve integrated management of all subsystems to create an integrated product, simplify the design, procurement and construction process. 上一个产品 下一个产品