搜索

Product Details All Telecom Terminal & Server 终端和服务器 人脸识别测温一体机MJ30-2T08 人脸识别一体机 主要卖点 ●8英寸，液晶显示屏，屏幕比例10:16，屏幕分辨率800*1280 ●采用200万双目摄像头，面部识别距离0.3-2米，支持双目活体检测技术，有效防范照片、视频、模型等攻击行为； ●口罩检测：口罩识别准确率85%，满足常规口罩检测要求，支持口罩佩戴提示，同时可关联门禁控制； ●支持二维码扫码识别，广泛应用于访客临时二维码开门、健康码登记筛查等； ●多种识别模式：人脸识别、IC卡识别、二维码识别等多种模式可选； ●语音播报：支持人脸识别验证结果播报、口罩佩戴提示播报等。 各项主要参数指标 产品关键参数 Download Product Booklet Related Products

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 QH-S60 Solar Power System Key selling points (1) Lithium battery rated capacity 96000mAH(96AH) (2) 1600 battery cycles (3) Solar panels are glass laminate encapsulation process (4) National standard products after various strict tests Each main parameter index Product key parameters 上一个产品 下一个产品

Product Details All Telecom Terminal & Server 通信 GP01-H40 卧式光缆接头盒 该产品适用于室外光缆架空、管道等直通接续和分歧等干线光缆和普通光缆网络接续。采用双端卧式设计结构， 本产品具有高强度机械性能、高密封性能、耐腐蚀性强、耐候性优异等特点，多光缆端口管理，可机械重复开启；结构布局合理，施工操作简单快捷。 应用场景 室外架空、管道等普通光缆接头接续，可用于城区或城乡普通光纤网络接续保护。 结构图 性能特点 1、壳体采用优质工程塑料注塑工艺生产、添加有抗紫外线、耐老化助剂，机械强度高； 2、盒体采用双端进出光缆设计结构、便于架空挂杆等可开启式结构； 3、盒体盒盖采用非硫化橡胶密封结构，气密性良好； 4、盒体具备电气断开或连通功能，可选配气嘴； 5、大容量接续，满足干线或特种光缆接续保护； 6、盒体采用4进4出光缆口布局设计，满足最多6条光缆接入管理； 7、防白蚁、耐酸碱油、抗极寒和高温环境需订货单独说明。 技术参数 1、适应环境温度：-40℃~+65℃。 2、大气压力：70~106Kpa。 3、轴向拉力：〉1000N/1min以上。 4、压扁：盒内充入60±5kpa气压，应能承受2000N/100mm横向均布压力，加力时间不小于1ｍｉｎ，试验后接头盒不漏气、无变形、无损伤。 5、冲击：光缆接头盒应能承受落高1m、钢球质量1.6Kg，冲击次数为3次的冲击。 6、弯曲：光缆接头盒与光缆接合处应能承受弯曲张力负荷为150N、弯曲角度±45°的10个循环的弯曲。 7、扭转：光缆接头盒应能承受扭矩不小于50N·m，扭转角度±90°，共10次循环的扭转。 8、跌落：光缆接头盒应能承受2.2m高度3次的跌落，试验后接头盒不漏气、无变形、无损伤。 9、抗拉力：〉2000N/10cm2压力，时间1min。 10、震动：接头盒承受振动频率为10Hz、振幅为±3mm、振动次数为106的振动，其光纤附加损耗变化值不超过0.2dB; 11、温度循环：-40℃~+65℃，内部气压60(+5)Kpa,循环次数10次， 常温后气压下降不超过5kpa。 12、光纤曲率半径>37.5mm,光纤熔接盘附加衰耗≤0.01dB。 施工常用工具 十字改刀、卷尺、内六角扳手。 Download Product Booklet Related Products 1/7 GP01-H63 卧式光缆接头盒 1/8 GP01-H61 卧式光缆接头盒 1/7 GP01-H60 卧式光缆接头盒 1/7 GP01-H55 卧式光缆接头盒

Product Details All Telecom Terminal & Server Telecommunication GJS03-M8AX-12~144C (GP313) Dome Fiber Optic Splice Closure, M 8 The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight-through splicing and divergence splicing. The product has the characteristics of high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc. It can be mechanically repeatedly opened, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、high-capacity splicing, to meet the trunk or special fiber optic cable splicing protection; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M8AX-12~144C (GP313) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 6-25mm Number of cable entry ports: 2+4 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: Yes Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried Download Product Booklet Related Products 1/5 GJS03-M8AX-JX-24~144(GP322) Dome Fiber Optic Splice Closure, M 8

Product Details All Telecom Terminal & Server Terminal and Server Product Model:MJ-FBF401-DI Solar powered system + 4G camera Key selling points (1) Support telecom 4G network transmission (2) Can support solar or DC power (3) Built-in speakers, and can support external sound column (4) Human detection, sound and light alarm, regional intrusion alarm (5) Cloud storage support (6) Support two-way intercom (7) Waterproof and dustproof (8) Support human tracking, fixed speed cruise Each main parameter index Download Product Booklet Related Products

Product Details All Telecom Terminal & Server Telecommunication GJS03-M2AX-A8-144C (GP1418) Dome Fiber Optic Splice Closure, M 2 The product is suitable for outdoor optical cable overhead, pipeline and other straight-through splicing and divergence splicing, optical cable to meet the multi-divergence 2 into 8 out optical cable port management. The product has high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、Multi-divergent structure design with 2-in and 8-out multi-optical cable management; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M1AX-144C(GP200) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 6-25mm Number of cable entry ports: 2+4 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: No Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried Download Product Booklet Related Products 1/4 GJS03-M2AX-A8-24~96C-W21(GP1402) Dome Fiber Optic Splice Closure, M 2 1/4 GJS03-M2AX-A8, SC-24 24~72C-D (GP253) Dome Fiber Optic Splice Closure, M 2 1/3 GJS03-M2AX-A8-24~96C-N08(GP241) Dome Fiber Optic Splice Closure, M 2 1/4 GJS03-M2AX-A8-24~96C(GP206) Dome Fiber Optic Splice Closure, M 2

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GP01-H39 The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight-through splicing and divergence and other trunk fiber optic cable and common fiber optic cable network splicing. The use of double-ended horizontal design structure, the product has a high strength mechanical performance, high sealing performance, corrosion resistance, excellent weather resistance, etc., multi-cable port management, can be mechanically repeated to open; reasonable structure layout, construction operation is simple and fast. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable splice splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box adopts double-ended optical cable in and out design structure, convenient overhead hanging rod and other openable structure; 3、the box body box cover using non-vulcanized rubber sealing structure, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、high-capacity splicing, to meet the trunk or special fiber optic cable splicing protection; 6、The box adopts the layout design of 3 in and 3 out fiber optic cable ports to meet the management of up to 6 fiber optic cable access; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 60 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 60(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 37.5mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure. 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 4G HD Network Camera MJ-EBF401-PW Key selling points (1) Support telecom 4G network transmission, no need to deploy network cable (2) Light AI design for new generation of neural networks to recognize more humanoid faces (3) Adopt H.265 encoding compression technology, occupying less bandwidth and storage (4) Comply with the national standard products Each main parameter index Product key parameters 上一个产品 下一个产品

Product Details All Telecom Terminal & Server Terminal and Server NFC access control all-in-one machine MJ-SK87E Access control and sound column equipment Key selling points (1) Independent reset chip, the system will never die (2) 100,000 users, 100,000 credit card records (3) Identification mode support IC card, ID card (read UID), CPU card and other all-in-one (4) National standard products after various strict tests Each main parameter index Each main parameter index Download Product Booklet Related Products

Product Details All Telecom Terminal & Server Telecommunication GP01-H23 In-Line Horizontal Fiber Optic Splice Closure The product is suitable for indoor and outdoor fiber optic cable overhead, wall, building and other straight-through splicing, divergence splicing, fiber optic splitting, etc., using full silicone rubber mechanical seal and can be quickly and repeatedly open the way, the internal structure is reasonably designed, convenient construction operation; mainly used in urban areas, towns, rural fiber optic broadband engineering network, an ideal splitting and splitting fiber splicing box. Application Scenario Outdoor overhead, wall-mounted and other installations, suitable for use at the end of the fiber optic broadband network access network. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts double-ended optical cable in and out design structure, convenient overhead hanging rod and other openable structure, screw-free box sealing design, quick and easy to repeat opening, no need to replace sealing materials; very convenient for maintenance inspection and other operations; 3、the box adopts the fusion splice tray storage area and fiber into the end access area compartment design, can install 16 SC/UPC type adapters and 1 1 * 16 differential or 2 1 * 8 differential. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、voltage strength: 15KV (DC), 1min, no flying arc, no breakdown after the test; 4、Insulation resistance: >2*104 MΩ. 5、the maximum capacity of fiber optic fusion splicing: 24 cores; 6、the maximum number of fiber into the end: 16 cores, the maximum can be installed splitter: 1 * 16; 7、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure. Download Product Booklet Related Products 1/7 GP01-H63 In-Line Horizontal Fiber Optic Splice Closure 1/8 GP01-H61 In-Line Horizontal Fiber Optic Splice Closure 1/7 GP01-H60 In-Line Horizontal Fiber Optic Splice Closure 1/7 GP01-H55 In-Line Horizontal Fiber Optic Splice Closure