搜索

Product Details All Telecom Terminal & Server Telecommunication GJS03-M9AX-24~144C(GP317) Dome Fiber Optic Splice Closure, M 9 The product is suitable for outdoor optical cable overhead, pipeline and other straight-through splicing and divergence splicing. The product has the characteristics of high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc. It can be mechanically repeatedly opened, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、high-capacity splicing, to meet the trunk or special fiber optic cable splicing protection; 7、 termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M9AX-24~144C(GP317) Box material: PP Adapt to the diameter of fiber optic cable oval hole: 10-25mm; small hole: 6-25mm Number of cable entry ports: 2+6 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: Yes Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried Download Product Booklet Related Products 1/6 GJS03-M9AX-RS-288C-SRZJ21-W12(GP1423) Dome Fiber Optic Splice Closure, M 9 1/5 GJS03-M9AX-JX-288C-SRZJ21-W12(GP1425) Dome Fiber Optic Splice Closure, M 9

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GJS03-M15AX-A14-144C(GP394) The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight-through splicing and divergence splicing. This product has high strength mechanical properties, high sealing performance, corrosion resistance, excellent weather resistance, etc., multi-cable port management, can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and fast construction operation. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable splice splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is produced by injection molding process of high-quality engineering plastics, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts the single end in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; open the box body without tools; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle. Technical parameters or parameters table 1、Adapted to the ambient temperature: -20℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -20℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure, sawyer, heat blower or spray gun. Parameter table Model: GJS03-M14AX-RS-144C(GP374) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-20mm; small hole: 10-30mm Number of cable entry ports: 2+8 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: No Sealing method: mechanical + heat shrink seal Fiber into the end type and number: SC/24 Product use environment: overhead, pipeline, buried 上一个产品 下一个产品

Product Details All Telecom Terminal & Server Telecommunication GP01-H60 In-Line Horizontal Fiber Optic Splice Closure The product is suitable for indoor and outdoor fiber optic cable overhead, wall, building and other straight-through connection, divergent connection, fiber optic splitting, etc., using a full silicone rubber mechanical seal and can be quickly and repeatedly open the way, can be installed inside the mini optical splitter, SC-type adapter into the end, the construction operation is convenient; mainly used in urban areas, towns, rural fiber optic broadband engineering network, an ideal splitting and splitting fiber splice box. Application Scenario Outdoor overhead, wall-mounted and other installations, suitable for use at the end of the fiber optic broadband network access network. Structure picture Performance characteristics 1、The shell is produced by injection molding process of high-quality engineering plastics, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts double-ended optical cable in and out design structure, convenient overhead hanging rod and other openable structure, screw-free box sealing design, quick and easy to repeat opening, no need to replace sealing materials; very convenient for maintenance inspection and other operations; 3、The box is designed with 8 SC/UPC end ports, and the lower side of the box is connected to the user's skin cable, which is reserved for the installation of mini optical splitter. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、voltage strength: 15KV (DC), 1min, no flying arc, no breakdown after the test; 4、Insulation resistance: >2*104 MΩ. 5、the maximum capacity of fiber optic fusion splicing: 24 cores; 6、the maximum number of fiber into the end: 8 cores, the maximum can be installed splitter: 1 * 8; 7、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure. Download Product Booklet Related Products 1/7 GP01-H63 In-Line Horizontal Fiber Optic Splice Closure 1/8 GP01-H61 In-Line Horizontal Fiber Optic Splice Closure 1/7 GP01-H55 In-Line Horizontal Fiber Optic Splice Closure 1/6 GP01-H54 In-Line Horizontal Fiber Optic Splice Closure

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GP01-H23 The product is suitable for indoor and outdoor fiber optic cable overhead, wall, building and other straight-through splicing, divergence splicing, fiber optic splitting, etc., using full silicone rubber mechanical seal and can be quickly and repeatedly open the way, the internal structure is reasonably designed, convenient construction operation; mainly used in urban areas, towns, rural fiber optic broadband engineering network, an ideal splitting and splitting fiber splicing box. Application Scenario Outdoor overhead, wall-mounted and other installations, suitable for use at the end of the fiber optic broadband network access network. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts double-ended optical cable in and out design structure, convenient overhead hanging rod and other openable structure, screw-free box sealing design, quick and easy to repeat opening, no need to replace sealing materials; very convenient for maintenance inspection and other operations; 3、the box adopts the fusion splice tray storage area and fiber into the end access area compartment design, can install 16 SC/UPC type adapters and 1 1 * 16 differential or 2 1 * 8 differential. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、voltage strength: 15KV (DC), 1min, no flying arc, no breakdown after the test; 4、Insulation resistance: >2*104 MΩ. 5、the maximum capacity of fiber optic fusion splicing: 24 cores; 6、the maximum number of fiber into the end: 16 cores, the maximum can be installed splitter: 1 * 16; 7、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure. 上一个产品 下一个产品

Product Details All Telecom Terminal & Server Telecommunication Network Cabinet Sheet Metal Network cabinet, widely used in the installation and placement of ETIS standard equipment and 19″, 21″ standard equipment for system integration, to provide reliable installation, support, power supply, ventilation device for system equipment, and effective protection for system equipment. Network cabinet is a comprehensive equipment to complete the connection between external cable and program-controlled switch, between digital multiplexing equipment and digital multiplexing equipment, and between external fiber optic cable and optical communication equipment, which is suitable for the integration of engineering control systems in various industries such as computer, data, information, electronics, finance, electric power and electrical. Product Benefits Compatibility: Support all 19″, 21″ standard equipment installation Heat dissipation performance: high-density mesh door, ventilation rate of 80% Stable structural design: static load 1800kg Scalability: Standard with side-by-side cabinet assembly, supports side-by-side installation of cabinets with and without side-by-side panels High availability: Vertical mounting casters can be dynamically adjusted to meet different installation depths of equipment Excellent ventilation: integrated ventilation system, professional airflow organization design Convenient access to and from the cable: cable management dedicated channel, you can choose any way into the cable Air inlet mode can be selected: the upper air inlet, lower air inlet and forward air inlet three ways Grounding protection design:Multi-point grounding set inside the cabinet Removable: Quickly removable front, back and side door design. Product Type Product use (1) generally used in network wiring rooms, floor wiring rooms, central server rooms, data rooms, control centers, monitoring rooms, monitoring centers, etc.; (2) can greatly enhance the overall aesthetic degree of the server room. Take the 19-inch specification cabinet as an example, the 19-inch design can accommodate a large number of network equipment, which can simplify the layout of the server room and improve the overall aesthetic level of the server room; (3) can effectively protect the safety and stability of the equipment. The equipment will emit a lot of heat when working, the cooling fan of the network cabinet can send the heat emitted by the equipment out of the cabinet to ensure the safe and stable operation of the equipment. Product application tools open-end wrenches, openers This product is mainly equipped with a variety of network equipment, the process of installation can be used in the Qizi, wrench. Frequently Asked Questions What is the difference between a network cabinet and a server cabinet? Usually, the depth of the network cabinet is less than or equal to 800 mm, while the depth of the server cabinet is greater than or equal to 800 mm. Secondly, server cabinets are generally used to install equipment such as servers, monitors or UPS to provide a good working environment for electronic equipment. And network cabinets are mainly used to install routers, switches, fiber optic wiring boxes, fiber optic adapters and other equipment. Can I replace the network cabinet with a wooden shelf? No. The role of network cabinets is to place network equipment, from this function, ordinary wooden shelves can also play the same role, but the difference is that the network cabinet design is more reasonable, more scientific, is designed specifically for the storage of network equipment and design, some also have enhanced electromagnetic shielding, reduce the work of noise and other functions, ordinary shelves can not play such a role. How is the network cabinet wired? Network cabinet cabling can be used together with cable management frames or wiring closets; network cabinets are used to install switches and other equipment, and the number of cables in network cabinets will be quite large due to the large space of network cabinets and the installation of more equipment, taking into account the vertical and horizontal cable fixing, network cabinet cabling can be used together with vertical cable management frames and horizontal cable management frames. If it is used in 40G/100G network environment, it can be used with ultra-high density fiber optic distribution box. In addition, in order to facilitate the cable management in the network cabinet, we can use cable ties to bundle the cable categories for fixing. How to maintain the network cabinet? Avoiding light, dust, pressure control in the cabinet, space control can extend the life of the network cabinet. Download Product Booklet Related Products 1.png 2.png 1.png 1/2 Traditional fiber optic cable transfer box Sheet Metal 1/14 Fiber optic cable termination box Sheet Metal 1/1 All-in-one fusion tray Sheet Metal 1/2 No-jump fiber optic cable transfer box Sheet Metal

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 No-jump fiber optic cable transfer box Fiber optic cable transfer box is an outdoor connection between the backbone and wiring fiber optic cable interface equipment. With the introduction of fixed fiber optic cable, grounding protection, fiber fusion, wiring, storage, route management and other functions, can easily provide link connection, distribution and transmission functions. It is used for the deployment of various application scenarios, and is generally installed in the environment of roadside, community green area, industrial park, building side, electric pole, etc. Widely used in the construction and transformation of telecom operators' basic networks, FTTx, metropolitan area network transmission, etc. No-jumper fiber optic cable transfer box is suitable for FTTH network in the optical distribution point. It can complete the introduction, fixing and stripping protection of optical cable, fusion splicing and protection of optical fiber, storage, parking and routing management of optical splitter pigtails, etc.; it provides direct fusion function of optical fiber and patchless wiring function. It can install box type optical splitter, insert type and other value-added module units according to customers' requirements. Widely used in ODN fiber optic communication network. Product advantages The box is made of SMC polymer material or high quality sheet metal material, with excellent heat insulation performance and IP65 protection level. Full frontal operation, pull-out structure, fusion and wiring integration module operation, easy maintenance. The mooring position is designed to protect the free pigtail end face of the optical split. Provide direct fusion unit for direct fusion operation of fiber optic cable. Suitable for ribbon and bundle fiber optic cable. With reliable optical cable introduction and fixed, protection, grounding device. With a variety of fusion, wiring markings, convenient fusion and wiring records. Reasonable fiber coiling structure, to ensure that the fiber winding radius of any position is greater than 30mm. Optionally, optical splitters can be installed to form a complete fiber optic cable splitting and management system. Allocation and scheduling of fiber is done on the front side; Adopt 12-core fusion and distribution integration module, each connection module can be withdrawn individually, easy to operate; Card mounting FC, SC and other adapters, adapters and the front of the chassis at an oblique angle, not only to ensure the radius of curvature of the jumper, but also to avoid the arc light burns the eyes; External pigtail type, centralized fiber storage type; Plug-in optical splitter method, which can be applied to the primary splitting point of secondary splitting or primary splitting (centralized splitting); Addressing the management and expansion of optical splitters; Applying the concept of skip-free fiber optic cable transfer box to reduce distribution adapters and patching fibers, reduce communication failure points and insertion losses, and enhance network security; Wiring area pigtail fixed length and equipped with an orderly pigtail management center with clear interface; All modular design, on-demand configuration, application flexibility and cost reduction. According to the installation method, there are wall-mounted, overhead and floor-mounted. Comply with YD/T 988 industry standard. Product Type Product usage Widely used in PON technology FTTH fiber access network, is one of the ideal equipment in FTTH construction, can realize the fiber splicing, storage, termination, placement of optical splitter and the deployment of in-home fiber optic cable and other functions. Product application tools Fiber melting machine, power meter, anhydrous ethanol, OTDR tester, wire cutter, diagonal pliers, horizontal ruler, impact drill, screwdriver, bellows, black tape, fireproof mud, optical power meter, pen red light source, etc. Frequently Asked Questions How to confirm the number of cores in the fiber optic cable transfer box? Confirmation according to the design unit drawings. What is the waterproof and dustproof level of the optical cable transfer box? IP65。 Which national standard does the fiber optic cable handover box meet? In line with YD/T 988 industry standard. Is the fiber optic cable transfer box customizable according to demand? Yes. Optical cable transfer box SMC box and stainless steel box selection? The material can be used for more than 10 years, the function is the same, the SMC box price is lower than the price of stainless steel box. 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GP01-H54JF4-48 直插式光纤接头盒专为接头和保护尺寸为12-16毫米的所有类型光缆的光纤接头而设计。它主要用于在架空、管道或人孔应用中连接和分支光缆。采用高强度工程塑料，经高压注塑成型。添加抗紫外线、抗腐蚀、抗老化元素，经久耐用。可重复开启的机械密封系统，内部结构简单合理，安装方便，是 通信网络建设的可靠选择。 Product description The H54 horizontal optical cable splice box developed and designed by our company adopts a repeatable openable structure design, and is currently the fastest and most reliable splice box set in China. The sturdy optical cable splice box and main structural parts are injection-molded with engineering plastics. The box body has passed strict aging tests. It has the functions of flame retardant, waterproof, shockproof and impact resistance. It has reliable sealing performance and is convenient for multiple packaging. Product Specification size 281.6*151.6*70.5 mm Number of splice trays 2 The maximum amount of molten fiber 48 cores (24 cores/disk) Cable entry hole and applicable cable diameter 2 in 2 out, suitable for 6-12mm fiber optic cable diameter Material Box body: improved PP Splice tray: ABS flame retardant material Structural features ●The performance indicators of the product meet the requirements of the national YD/T814-2007 standard ●The outer box body is made of high-strength engineering plastics, and anti-aging agent is added to high-pressure injection molding, which has the characteristics of light weight, high mechanical strength, strong corrosion resistance, lightning resistance, and long service life. ●The outer box body and the cable inlet are sealed with silicone rubber strips, and the gel is used to fill the gaps. The performance is reliable, and it is easy to open, use and maintain repeatedly. ●The unique configuration of 2 plugs enables users to choose flexibly according to the actual use conditions, and can ensure the reliability and practicability of the cable inlet seal of the joint box. ●The box adopts independent structure fusion fiber tray, which makes the fiber core configuration, capacity expansion and cable grounding flexible, convenient and safe. ●The metal structure and fasteners inside and outside the box are all made of stainless steel, which can meet the convenience and repeated use in various environments. Main Specifications ●Radius of curvature of optical fiber: ≥35mm ●Additional loss of fiber optic disk: ≤0.01dB ●Length of optical fiber in disk: ≥1m ●Maximum fiber capacity: single fiber 48 cores ●Applicable temperature range: -40℃～+70℃ ●Anti-lateral pressure: ≥2000N/10cm ●Shock resistance: ≥20N.m 上一个产品 下一个产品

Product Details All Telecom Terminal & Server 通信 GJS03-M15AX-A14-144C（GP394） 帽式光缆接头盒, M11-14 该产品适用于室外光缆架空、管道等直通接续和分歧接续。 本产品具有高强度机械性能、高密封性能、耐腐蚀性强、耐候性优异等特点，多光缆端口管理，可机械重复开启，可维护性高；结构布局合理，施工操作简单快捷。 应用场景 室外架空、管道等普通光缆接头接续，可用于城区或城乡普通光纤网络接续保护。 性能特点： 1、壳体采用优质工程塑料注塑工艺生产、添加有抗紫外线、耐老化助剂，机械强度高； 2、盒体采用单端进出光缆设计结构、便于架空挂杆等安装且筒体可快速开启进行检修和维护；开启盒体无须工具； 3、壳体与底部采用硅橡胶密封圈、光缆口利用耐温热缩管密封，气密性良好； 4、盒体具备电气断开或连通功能，可选配气嘴。 技术参数 1、适应环境温度：-20℃~+65℃。 2、大气压力：70~106Kpa。 3、轴向拉力：〉1000N/1min以上。 4、压扁：盒内充入40±5kpa气压，应能承受2000N/100mm横向均布压力，加力时间不小于1ｍｉｎ，试验后接头盒不漏气、无变形、无损伤。 5、冲击：光缆接头盒应能承受落高1m、钢球质量1.6Kg，冲击次数为3次的冲击。 6、弯曲：光缆接头盒与光缆接合处应能承受弯曲张力负荷为150N、弯曲角度±45°的10个循环的弯曲。 7、扭转：光缆接头盒应能承受扭矩不小于50N·m，扭转角度±90°，共10次循环的扭转。 8、跌落：光缆接头盒应能承受2.2m高度3次的跌落，试验后接头盒不漏气、无变形、无损伤。 9、抗拉力：〉2000N/10cm2压力，时间1min。 10、震动：接头盒承受振动频率为10Hz、振幅为±3mm、振动次数为106的振动，其光纤附加损耗变化值不超过0.2dB; 11、温度循环：-20℃~+65℃，内部气压40(+5)Kpa,循环次数10次， 常温后气压下降不超过5kpa。 12、光纤曲率半径>30mm,光纤熔接盘附加衰耗≤0.01dB。 施工常用工具 十字改刀、卷尺、锯工、热风机或喷枪。 参数表 型号：GJS03-M15AX-A14-144C（GP394） 盒体材质：PP 适应光缆直径：椭圆孔：10-20mm；小孔：6-12mm 入缆口数：2+16 熔纤盘最大容量(芯）：24 最大熔接芯数(芯）：144 光纤余纤收容装置：否 密封方式：机械+热缩密封 光纤成端类型及数量：--- 产品使用环境：架空、管道、地埋 Download Product Booklet Related Products 1/5 GJS03-M15BX-A14-144C-NABS02（GP394） 帽式光缆接头盒, M11-14 1/6 GJS03-M15BX-A14-144C（GP394） 帽式光缆接头盒, M11-14 1/4 GJS03-M15AX-A14-144C-NABS02（GP394） 帽式光缆接头盒, M11-14 1/6 GJS03-M14AX-JX-144C(GP374) 帽式光缆接头盒, M11-14

Product Details All Telecom Terminal & Server Telecommunication GJSO3-M2AX-24~144C-SRZJ14(GP262) Dome Fiber Optic Splice Closure, M 2 The product is suitable for outdoor optical cable overhead, pipeline and other straight-through splicing and divergence splicing. The product has the characteristics of high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc. It can be mechanically repeatedly opened, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、Multi-divergent structure design with 2-in and 8-out multi-optical cable management; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M1AX-144C(GP200) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 6-25mm Number of cable entry ports: 2+4 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: No Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried Download Product Booklet Related Products 1/4 GJS03-M2AX-A8-144C (GP1418) Dome Fiber Optic Splice Closure, M 2 1/4 GJS03-M2AX-A8-24~96C-W21(GP1402) Dome Fiber Optic Splice Closure, M 2 1/4 GJS03-M2AX-A8, SC-24 24~72C-D (GP253) Dome Fiber Optic Splice Closure, M 2 1/3 GJS03-M2AX-A8-24~96C-N08(GP241) Dome Fiber Optic Splice Closure, M 2

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 Outdoor Cabinets - Battery Cabinets The battery cabinet for base station is a special cabinet to provide uninterrupted power supply for communication base stations and related equipment, which can be placed with various types of lead-acid batteries or lithium iron phosphate batteries to provide power supply for base stations and related equipment to ensure continuous operation of base stations without interruption of services under extreme conditions, help customers to improve the comprehensive service capability of upgrading communication system platforms and meet customer needs. Product Benefits (1) Small and beautiful, compact housing (less than 0.8 m2/unit) (2) Modular design, with high reliability, simple maintenance, flexible combination according to the different needs of customers (3) Support multi-scene and multi-functional applications (rooftop stations, street stations, suburban stations, operator co-stations, etc.) (4) Made of high quality hot-dip galvanized sheet with flame retardant material (5) Good insulation effect (PU core not less than 45MM) (6) Outdoor waterproof rating IP55 (7) Low cost of site selection (8) Compatible with a wide range of battery models (9) Support cabinet expansion (10) Intelligent temperature control system Product Type Product use (1) The installation of the cabinet fixed function: can be installed and fixed various types of lead-acid batteries or lithium iron phosphate batteries (2) Cabinet line management function: the cabinet has a variety of internal line management slot, line management frame, line management board and alignment channel, etc., to provide a very convenient wiring management for a variety of equipment installed inside the cabinet (3) Cabinet protection function: the cabinet is a relatively closed space, the cabinet door can be closed to the internal equipment to play a protective role to prevent damage from the outside, such as rats can be prevented from entering the cabinet inside the equipment or cable into the line damage (4) The cabinet can integrate refrigeration, access control, cabinet, lighting, fire protection, dynamic monitoring, emergency ventilation and other systems, and complete the integrated management of all subsystems through the monitoring system. (5) Provide reliable temperature control and regulation system for the full and stable operation of communication transmission equipment (6) Provide reliable grounding protection system for communication transmission equipment and cabinets. Product application tools All-in-one cabinets can be fully applied to business outlets (telecommunications, finance, energy, broadcasting, retail) small businesses, large enterprises, government, education, medical branches and networks between the edge of the data center, the use of tools need to be applied to: fusion machine, fiber optic cutting knife, fiber optic tester, pen red light source, optical power meter, dissecting pliers, diagonal pliers, screwdriver, the need to prepare the construction materials are: Anhydrous ethanol, adhesive tape, flexible plastic tape, fireproof mud, corrugated pipe, etc. Frequently Asked Questions Do you support non-standard product customization in addition to the above equipment sizes? Support, customers can put forward specific requirements according to their needs, the company supports non-standard customized products, can provide the corresponding battery specifications and related requirements, to provide non-standard design. What is the difference between the power supply of an integrated cabinet battery cabinet and a traditional cabinet? All-in-one cabinet battery cabinet can provide uninterrupted power supply for base stations and cabinets to ensure that equipment in extreme conditions such as power outages can ensure normal operation of equipment, while configured with a precision cooling system to ensure normal operation of IT equipment, with dynamic loop monitoring system to monitor the working status of equipment in real time. The integrated cabinet adopts a fully sealed design and can be used in a variety of harsh indoor environments without the need to set up separate server rooms. What are the advantages of an all-in-one cabinet? (1) Compared with traditional server room, integrated server room structure is simpler, factory pre-verification test is more standardized, safe and reliable compared with on-site construction; fully sealed design to eliminate the outside air dust and corrosive gases on IT equipment; dynamic loop monitoring system to monitor the infrastructure in a comprehensive manner, timely alarm abnormal conditions, security and worry-free. (2) More time-saving and labor-saving construction of the site, the modular design of the product allows the site to be installed and delivered within a day, more than 2 times faster than the traditional construction mode. (3) smaller footprint, a single cabinet covers an area of only 0.6m2 minimum, closed design, strong environmental adaptability, no decoration, flooring and other supporting works, effectively reducing the cost of building the station, fully enclosed refrigeration to enhance the energy efficiency of the whole machine, so that the total cost of ownership significantly reduced. (4) better management, one-stop after-sales service can deal with all kinds of equipment failure problems in a timely manner, saving time and effort; standard with dynamic loop monitoring system, local, remote monitoring and management, more multi-network access to the upper management platform unified supervision, diversified options to support. (5) Integrated and integrated design, integrated cabinet integration of UPS power supply, power distribution, refrigeration, access control, cabinets, lighting, fire, dynamic monitoring, emergency ventilation and many other systems, through the monitoring system to achieve integrated management of all subsystems to create an integrated product, simplify the design, procurement and construction process. 上一个产品 下一个产品