搜索

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GJS03-M14AX-RS-144C(GP374) The product is suitable for outdoor optical cable overhead, pipeline and other straight-through splicing and divergence splicing. The product has the characteristics of high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc. It can be mechanically repeatedly opened, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is produced by injection molding process of high-quality engineering plastics, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts the single end in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; open the box body without tools; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle. Technical parameters or parameters table 1、Adapted to the ambient temperature: -20℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -20℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure, sawyer, heat blower or spray gun. Parameter table Model: GJS03-M14AX-RS-144C(GP374) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-20mm; small hole: 10-30mm Number of cable entry ports: 2+8 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: No Sealing method: mechanical + heat shrink seal Fiber into the end type and number: SC/24 Product use environment: overhead, pipeline, buried 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 Integrated Cabinet Integrated cabinet, also known as integrated assembly rack, can be fiber optic units, digital units, audio wiring modules and other units in one, according to the need for a variety of combinations, flexible and versatile, can meet a variety of different needs, so that the circuit, optical wiring, wiring and transfer of business changes for convenient, flexible. SDH equipment units, ODF units, DDF units and MDF modules can be installed in the integrated assembly rack. Used in integrated base station transmission network, it can optimize fiber and cable alignment, save space and engineering investment in server room. Product advantages (1) Compatibility: standard U and standard 19-inch installation size design, strong adaptability, can install a variety of equipment; (2) structure solid: high-strength sheet metal cabinet, the overall welded structure, solid and reliable, surface spraying treatment; (3) alignment convenience: can be up and down into the line, both sides can line, according to the need to configure vertical and horizontal management line ring, optical cable fixed with a special fixed device, assembled in the back of the cabinet; (4) Excellent ventilation rate: optional rear double door mesh structure, ventilation rate of 80%; (5) Expandability: removable side panel design, convenient and rack expansion. (6) Convenient assembly: whole assembly or on-site assembly, fast and efficient installation, rapid site coverage; (7) Standardization: international standard installation size, closed structure, universal and safe; (8) Customization: Customizable according to customer needs. Product type The height of the rack is mainly 1200mm, 1600mm, 1800mm, 2000mm, 2200mm several specifications, width recommended size: 600mm, 800mm, depth recommended size: 450mm, 600mm, 800mm; the following table mainly lists the height of 2000mm, 2200mm cabinet specifications, the rest can be customized according to demand The rest can be customized according to demand. Product usage (1) through the use of intelligent integrated cabinet, to achieve the detection of outdoor front-end utility, communication links, temperature and humidity, flooding, opening and closing doors and other dynamic loop detection, external equipment power supply and current/voltage detection, detection of peripheral business communication interfaces, etc.; (2) the establishment of multiple cabinets combined use, through the platform of the center's core switching equipment, core routing equipment, storage devices, servers, databases and key applications to detect. Application tools wire hitting knives, open-end wrenches, openers, fusion splicers This product is a combination of active and passive standard cabinet, can be configured with a wide range of equipment, can achieve a wide range of functions, when using the audio module need to hit the line knife, when using the ODF module need to use the fusion machine for fiber fusion, other ordinary equipment installation process can be used in the Qizi, copper wiring occasions need to use the 16-19 open-end wrench to operate Other common equipment installation process can be used, there are copper wiring occasions need to use 16-19 open-end wrench to operate. Frequently Asked Questions How do I choose a rack? Data center users have a variety of options for open racks and enclosed enclosures for mounting equipment and access panels, each with its own advantages and disadvantages. As with cable channels, there is no universal solution. With respect to width, the specification for servers, switches and patch panels is 19 〃; for carrier equipment and other equipment of greater width in the introduction room, the applicable specification is 23 〃. The optimum height is 7" and the maximum allowable height is 8". How is the cable managed? Racks can be easily equipped for spacious, easy-access vertical cable managers. Many cabinets do not have enough space to accommodate vertical cable managers. Often, the only space available is in narrow, vertical corners and gaps between adjacent cabinets, neither of which is easily accessible. Cable entry holes, cable manager cross-sectional area are to be given by calculation. A minimum height of 100 mm (4 〃) should be left between the rails and the door for the cable manager, regardless of whether a patch panel is installed in the cabinet. What do I need to pay attention to when choosing an integrated cabinet? (1) Size: The size of the integrated cabinet needs to be determined according to the usage scenario, quantity and server specifications. If the purchased cabinet is too big or too small, it will easily cause waste of space utilization in the computer room or cannot accommodate the equipment. (2) load-bearing: comprehensive cabinets need to carry the product density is increasingly answer, so need to meet a certain load-bearing capacity. Generally speaking, the load-bearing capacity of multi-desktop network cabinets is more than 500KG. (3) Protection performance: Integrated cabinets are usually made of steel, but there are still differences in protection ability and leakage protection. If the earthquake, fire and other disaster conditions can ensure that its equipment from damage, there are more advantages. (4) Heat emission: The equipment inside the integrated network cabinet will generate a lot of heat when it works, and the heat dissipation capability of the cabinet needs to be considered to ensure the stable operation of the equipment inside the cabinet. At the same time, you can also choose the cabinet with a fan, which can ensure the cooling effect of the equipment. (5) management performance: integrated cabinet needs to be equipped with the corresponding management system for remote and local management. Users can investigate, monitor and manage the equipment inside the cabinet through the network or terminal interface. 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GP01-H42 The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight-through splicing and divergence and other trunk fiber optic cable and common fiber optic cable network splicing. The use of double-ended horizontal design structure, the product has a high strength mechanical performance, high sealing performance, corrosion resistance, excellent weather resistance, etc., multi-cable port management, can be mechanically repeated to open; reasonable structure layout, construction operation is simple and fast. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable splice splicing, can be used for metropolitan area network backbone, urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box adopts double-ended optical cable in and out design structure, convenient overhead hanging rod and other openable structure; 3、the box body box cover using non-vulcanized rubber sealing structure, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、high-capacity splicing, to meet the trunk or special fiber optic cable splicing protection; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 60 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 60(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 37.5mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure. 上一个产品 下一个产品

Product Details All Telecom Terminal & Server 通信 GJS03-M15BX-A14-144C-NABS02（GP394） 帽式光缆接头盒, M11-14 该产品适用于室外光缆架空、管道等直通接续和分歧接续。 本产品具有高强度机械性能、高密封性能、耐腐蚀性强、耐候性优异等特点，多光缆端口管理，可机械重复开启，可维护性高；结构布局合理，施工操作简单快捷。 应用场景 室外架空、管道等普通光缆接头接续，可用于城区或城乡普通光纤网络接续保护。 性能特点： 1、壳体采用优质工程塑料注塑工艺生产、添加有抗紫外线、耐老化助剂，机械强度高； 2、盒体采用单端进出光缆设计结构、便于架空挂杆等安装且筒体可快速开启进行检修和维护；开启盒体无须工具； 3、壳体与底部采用硅橡胶密封圈、光缆口利用耐温热缩管密封，气密性良好； 4、盒体具备电气断开或连通功能，可选配气嘴。 技术参数 1、适应环境温度：-20℃~+65℃。 2、大气压力：70~106Kpa。 3、轴向拉力：〉1000N/1min以上。 4、压扁：盒内充入40±5kpa气压，应能承受2000N/100mm横向均布压力，加力时间不小于1ｍｉｎ，试验后接头盒不漏气、无变形、无损伤。 5、冲击：光缆接头盒应能承受落高1m、钢球质量1.6Kg，冲击次数为3次的冲击。 6、弯曲：光缆接头盒与光缆接合处应能承受弯曲张力负荷为150N、弯曲角度±45°的10个循环的弯曲。 7、扭转：光缆接头盒应能承受扭矩不小于50N·m，扭转角度±90°，共10次循环的扭转。 8、跌落：光缆接头盒应能承受2.2m高度3次的跌落，试验后接头盒不漏气、无变形、无损伤。 9、抗拉力：〉2000N/10cm2压力，时间1min。 10、震动：接头盒承受振动频率为10Hz、振幅为±3mm、振动次数为106的振动，其光纤附加损耗变化值不超过0.2dB; 11、温度循环：-20℃~+65℃，内部气压40(+5)Kpa,循环次数10次， 常温后气压下降不超过5kpa。 12、光纤曲率半径>30mm,光纤熔接盘附加衰耗≤0.01dB。 施工常用工具 十字改刀、卷尺、锯工、热风机或喷枪。 参数表 型号：GJS03-M15BX-A14-144C-NABS02（GP394） 盒体材质：PP 适应光缆直径：椭圆孔：10-20mm；小孔：6-12mm 入缆口数：2+16 熔纤盘最大容量(芯）：24 最大熔接芯数(芯）：144 光纤余纤收容装置：是 密封方式：机械+热缩密封 光纤成端类型及数量：--- 产品使用环境：架空、管道、地埋 Download Product Booklet Related Products 1/6 GJS03-M15BX-A14-144C（GP394） 帽式光缆接头盒, M11-14 1/4 GJS03-M15AX-A14-144C-NABS02（GP394） 帽式光缆接头盒, M11-14 1/4 GJS03-M15AX-A14-144C（GP394） 帽式光缆接头盒, M11-14 1/6 GJS03-M14AX-JX-144C(GP374) 帽式光缆接头盒, M11-14

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 Buried fiber optic cable handover box In the full-service competition pattern, especially the development of broadband services, the requirements for transmission resources are increasingly high, and the layout of the transmission network requires the establishment of a large number of cable cross-over boxes to meet a variety of access needs. But the traditional above-ground fiber optic cable transfer box is generally standing in the green belt on both sides of the road, there are many defects. Not beautiful, difficult to coordinate with the surrounding environment; difficult to select the site, difficult to build; coexistence, affecting the cityscape; exposed to the outdoors, the wind, sun and rain; easy to be destroyed, the device is easy to aging; The use of direct burial by way of buried underground cable transfer box directly buried in the soil, relying on the soil to heat insulation or heat dissipation, buried light transfer box and the direct contact surface of the soil without ventilation window installation and use, underground cable transfer box does not need to consider personnel to enter the operation. Buried optical handover box is configured with the internal configuration of the end, splicing, wiring, optical splitting, pigtail parking, redundant fiber storage, cable fixed open stripping protection, cable management and other functional modules, the internal functional components of reasonable planning and zoning management, in the buried way to scientifically achieve all the functions of the optical cable handover equipment should have. External Environment: Above-ground ambient temperature:40℃～+55℃. Internal temperature The internal working temperature of the buried light interchange box should be:10℃~30℃. Internal humidity Relative humidity range inside the buried square cabin:≤90%(30℃2℃). Product Benefits No need to occupy ground and three-dimensional space, eliminating the need to declare land resources, and the project construction is highly controllable. It is easy to obtain the consent of municipalities and residential property owners for installation and construction. Avoid traffic collisions, unintentional damage by pedestrians or deliberate break-ins. The whole body is below the ground, completely free from "psoriasis". It is easy to coordinate with the existing facilities and environment, and does not affect either traffic safety or the city appearance after installation. Installation and maintenance are carried out on the ground, eliminating the difficulties and dangers of working at height. Eliminate the safety risks caused by overhead boxes in bad weather or wall-mounted boxes due to the aging of the load-bearing building. The insulation characteristics of the underground environment are conducive to ensuring the stability of communication quality and improving the service life of equipment. The box is made of high quality 304 stainless steel plate material, protection grade up to IP68. Full frontal operation, pull-out structure, fusion and wiring integration module operation, easy maintenance. Suitable for ribbon and bundle fiber optic cables. With reliable optical cable introduction and fixed, protective and grounding devices. Reasonable fiber coiling structure, to ensure that the fiber winding radius of any position is greater than 30mm. Adopt 12-core fusion and distribution integration module, each connection module can be withdrawn individually, easy to operate; Card mounting FC, SC and other adapters, adapters and the front of the chassis at an oblique angle, not only to ensure the radius of curvature of the jumper, but also to avoid arc light burns eyes; Buried fiber optic cable transfer box in and out of the cable should be used for special cable channels. The cable channel should be able to resist the buried environment of pressure, corrosion and other requirements, to provide good protection for the internal feeder. The cable channel interface should be well sealed, and no water leakage should occur. The cable channel should adopt a flexible and adjustable connection. The structure of the buried fiber optic cable handover box should have good structural strength, and all interfaces and welds, etc., should be well welded. After the completion of the cabin welding in the unpainted before, should be water pressure resistance test to verify the overall structure under water pressure leak-proof performance. Product Type Various core capacities are available according to customer needs, and structural designs can also be made according to actual needs to meet differential use requirements. Product Use Buried fiber optic cable transfer box is used for outdoor trunk cable and wiring fiber optic cable connection interface equipment, to achieve the fiber optic splicing, wiring has a direct connection and cross-connection function. buried fiber optic cable transfer box for ground location declaration difficulties, project construction is not controllable; need to be buried in the harsh environment of the underground. Product Application Tools Fiber optic fusion splicer, impact drill, lifting equipment, cement river sand, power meter, anhydrous ethanol, OTDR tester, dissecting pliers, fiber optic cutting knife, diagonal pliers, horizontal ruler, impact drill, screwdriver, bellows, black tape, optical power meter, pen red light source, etc. Frequently Asked Questions What is the waterproof and dustproof level of buried fiber optic cable transfer box? IP68。 Is the buried fiber optic cable transfer box can be customized according to demand? Yes. 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GJS03-M15AX-A14-144C-NABS02(GP394) The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight-through splicing and divergence splicing. This product has high strength mechanical properties, high sealing performance, corrosion resistance, excellent weather resistance, etc., multi-cable port management, can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and fast construction operation. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable splice splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is produced by injection molding process of high-quality engineering plastics, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts the single end in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; open the box body without tools; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle. Technical parameters or parameters table 1、Adapted to the ambient temperature: -20℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -20℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure, sawyer, heat blower or spray gun. Parameter table Model: GJS03-M14AX-RS-144C(GP374) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-20mm; small hole: 10-30mm Number of cable entry ports: 2+8 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: No Sealing method: mechanical + heat shrink seal Fiber into the end type and number: SC/24 Product use environment: overhead, pipeline, buried 上一个产品 下一个产品

Product Details All Telecom Terminal & Server 通信 光分路箱 钣金 光缆分路箱是针对FTTH建设中采用一级分光或二级分光等不同的场景需求而开发设计的产品，该产品多用于配线光缆通过光分路器与入户光缆实现连接，从而满足用户高速率带宽业务开通的需求，是ODN网络中重要的光接入设备。当光缆分纤箱内安装分光器时一般称作为分路箱，而根据分光器的不同，又分为盒式光缆分路箱和插片式光缆分路箱。 光缆分路箱适用于光分路器出局端后的分散放置的网络结构，由光缆开剥固定组件，光分路器模块、熔接模块、存储区等组成，完成光缆的引入固定、光纤的熔接配线、光分路器的安装管理、皮线光缆的盘存、固定和熔接等，实现光线路的分路增容。室外型可挂墙或抱杆安装，室内型可实现楼道或弱电井挂壁安装。 适于光纤接入网中的配线光缆与入户皮线光缆交接点使用，箱体采用壁挂或抱杆安装方式，适用于室内和室外两种场景：通过SC、FC、LC型光纤适配器及快速连接器对外线铠装光缆与入户皮线光缆之间进行连接与调度。 产品优点 非金属分光分纤箱： (1) 箱体采用优质ABS，机械强度高，坚固耐磨，寿命长。 (2) 箱体安装方式多样，可根据施工地点、作用不同，采用挂墙、嵌墙或抱杆安装方式，室内室外均可使用。 (3) 外观美丽大方，适用于绝大多数场合 (4) 全封闭式结构，防潮、防水、防尘、抗腐蚀耐老化性能好，室外型箱体防护等级IP55，室内型箱体防护等级IP53。 (5) 多种出缆方式，皮线光缆+普通光缆组合出缆。 (6) 工厂化皮缆尾纤，减少现场熔接，实现高质量低成本安装。 (7) 合理的走线路由保证光缆的有序管理，良好的光纤路由设计，保证光纤的曲率半径。 (8) 室内型产品时可适用于主干光缆掏接应用。 (9) 配置可选择适配器面板、插片式光分路器、微型光分路器。 (10) 可根据需求选用SC、FC、LC适配器。 (11) 多种箱体规格型号供选择，尺寸多样，适合各种场景施工安装。 金属分光分纤箱： (1) 箱体采用优质冷轧钢板、镀锌钢板、不锈钢板制造，箱体表面采用静电喷塑工艺，防尘、抗腐蚀耐老化性能优越，安全性能高。 (2) 箱体安装方式多样，可根据施工地点、作用不同，采用挂墙、嵌墙或抱杆安装方式，室内室外均可使用。 (3) 全封闭式结构，防潮、防水、防尘、抗腐蚀耐老化性能好，室外型箱体防护等级IP55，室内型箱体防护等级IP53。 (4) 多种出缆方式，皮线光缆+普通光缆组合出缆。 (5) 工厂化皮缆尾纤，减少现场熔接，实现高质量低成本安装。 (6) 合理的走线路由保证光缆的有序管理，良好的光纤路由设计，保证光纤的曲率半径; (7) 室内型产品时可适用于主干光缆掏接应用; (8) 配置可选择适配器面板、插片式光分路器、微型光分路器; (9) 可根据需求选用SC、FC、LC适配器； (10) 多种箱体规格型号供选择，尺寸多样，适合各种场景施工安装。 产品类型 根据箱体材料不同，可分为ABS塑料箱体和金属箱体。 产品用途 适用于光传输终端的成端熔接、分光、配线输出等功能，能有效的对光缆进行终接、保护及管理，为光网络传输过程中的必要设备。可壁挂、抱杆安装。 产品应用工具 光分路箱施工时，需要使用到的工具有：熔纤机、酒精、功率计、无水乙醇、OTDR测试仪、尾纤、剖线钳、光纤切割刀、斜口钳、水平尺、冲击钻、螺丝刀、波纹管、黄色胶布、黑色胶布、软塑带、戒子刀、防火泥、铁皮钳、光功率计、笔式红光源等。 常见问题解答 除上述设备尺寸外可不可以定制？ 可以，可根据客人要求进行设计制作，也可在原基础上进行延伸。 光缆分纤箱在门口有危害吗？ 因为这个光缆分纤箱只是一些只是分光器的接线端口，并没有太大的功率，自然也就不会有太大的辐射，对我们的人体也就没有任何危害。而且这个光缆分纤箱一般都安装在室外的大门口，室内与室外之间有了墙壁这个阻碍物，也就更不会给大家带来什么危害了。 有阻燃解决方案吗? 非金属材料制件具备抗腐蚀、抵抗老化的能力，非金属材料零部件（包括绝缘电线、电缆和发泡材料）为延燃材料，其燃烧性能能满足阻燃试验的要求。 光分纤箱和光分路箱的区别？ 光分纤箱：一般指光缆分纤箱，光缆分纤箱是用于室外、楼道内或室内连接主干光缆与配线光缆的接口设备。 光分路箱：是光纤链路中重要的无源器件之一，是具有多个输入端和多个输出端的光纤汇接器件。 Download Product Booklet Related Products 1/16 绝缘耐压固定装置（金具） 钣金 1/4 综合机柜 钣金 1/14 光缆终端盒 钣金 1/2 移动智慧厕所 钣金

Product Details All Telecom Terminal & Server Terminal and Server 4 million intelligent car recorder QH-DX01 Spring Promotion Cameras Key selling points (1) P2P Plug and Play (2) HD picture quality 2560*1440 30FPS (3) Using the latest H.265 encoding compression technology (4) Support cell phone APP remote monitoring (5) Support cell phone download video (6) Support WiFi, Telecom 4G card Each main parameter index Product key parameters Download Product Booklet Related Products 1/2 4 million intelligent indoor dome camera QH-ESF401-PI Spring Promotion Cameras

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GP01-H17 The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight-through splicing and divergence splicing. Double-ended horizontal design structure, the product has high strength mechanical properties, high sealing performance, corrosion resistance, excellent weather resistance and other characteristics, multi-cable port management, box body and optical cable mouth are designed with silicone rubber sealing structure, repeatedly open the box and other operations are simple and fast and do not need to replace the sealing material; reasonable structure layout, construction and operation is simple and fast. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable splice splicing, can be used for metropolitan area network backbone, urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts double-ended optical cable in and out design structure, convenient overhead hanging rod and other openable structure, screw-free box sealing design, quick and easy to repeat opening, no need to replace sealing materials; very convenient for maintenance inspection and other operations; 3、the box body box cover and optical cable mouth are used silicon rubber sealing structure, good air tightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、high-capacity splicing, to meet the trunk or special fiber optic cable splicing protection; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、 tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、 vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure. 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GJSO3-M1AX-144C-SRZJ14(GP1444) The product is suitable for outdoor optical cable overhead, pipeline and other straight-through splicing and divergence splicing. The product has the characteristics of high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc. It can be mechanically repeatedly opened, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、Anti-termites, acid and alkali resistant oil, resistance to extreme cold and high temperature environments need to be specified separately in the order. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、 tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、 vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M1AX-24~144C-SRZJ14-W20(GP1405) Box material: PP Adapt to the diameter of fiber optic cable: elliptical hole: 10-25mm Small hole: 6-25mm Number of cable entry ports: 2+4 Maximum capacity of fusion fiber tray (core:) 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: Yes Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 上一个产品 下一个产品