搜索

产品详情 全部 通信 终端和服务器 Telecommunication GJS03-M11AX-4/16-24~96C(GP341) Dome Fiber Optic Splice Closure, M 11-14 The product is suitable for outdoor fiber optic cable splitting fiber splitting fiber into the home project. This product has the characteristics of high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc. It can be mechanically repeatedly opened, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, wall-mounted and other installations, suitable for use at the end of the fiber optic broadband network access network. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts the single end in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; open the box body without tools; 3、Silicone rubber seal between the shell and the bottom. Technical parameters or parameters table 1、adapt to the ambient temperature: -40 ℃ ~ +65 ℃. 2、Atmospheric pressure: 70~106Kpa. 3、fiber radius of curvature > 37.5mm, fiber splicing tray additional attenuation ≤ 0.01dB; 4、with fiber into the end and fusion splicing; can take micro optical splitter maximum 1:16. Commonly used tools for construction cross cutter, tape measure. Parameter table Model: GJS03-M10AX-JX-432C(GP318) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 6-20mm Number of cable entry ports: 2+8 Maximum capacity of fusion fiber tray (core): 24 Maximum fusion core (core): 432 (12-core ribbon) Fiber optic residual fiber intake device: Yes Sealing method: Mechanical Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 点击下载产品手册 相关产品 1/5 GJS03-M15BX-A14-144C-NABS02(GP394) Dome Fiber Optic Splice Closure, M 11-14 1/6 GJS03-M15BX-A14-144C(GP394) Dome Fiber Optic Splice Closure, M 11-14 1/4 GJS03-M15AX-A14-144C-NABS02(GP394) Dome Fiber Optic Splice Closure, M 11-14 1/4 GJS03-M15AX-A14-144C(GP394) Dome Fiber Optic Splice Closure, M 11-14

产品详情 全部 通信 终端和服务器 Telecommunication GJSO3-M1AX-144C-SRZJ14(GP1444) Dome Fiber Optic Splice Closure, M 1 The product is suitable for outdoor optical cable overhead, pipeline and other straight-through splicing and divergence splicing. The product has the characteristics of high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc. It can be mechanically repeatedly opened, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、Anti-termites, acid and alkali resistant oil, resistance to extreme cold and high temperature environments need to be specified separately in the order. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、 tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、 vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M1AX-24~144C-SRZJ14-W20(GP1405) Box material: PP Adapt to the diameter of fiber optic cable: elliptical hole: 10-25mm Small hole: 6-25mm Number of cable entry ports: 2+4 Maximum capacity of fusion fiber tray (core:) 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: Yes Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 点击下载产品手册 相关产品 1/3 GJS03-M1AX-A8-144C-W30(GP1416) Dome Fiber Optic Splice Closure, M 1 1/3 GJS03-M1AX-A8,SC-24 24-72C-D(GP297) Dome Fiber Optic Splice Closure, M 1 1/3 GJS03-M1AX-A8-24-96C-N08(GP218) Dome Fiber Optic Splice Closure, M 1 1/4 GJS03-M1AX-A8-24~96C(GP204) Dome Fiber Optic Splice Closure, M 1

产品详情 全部 通信 终端和服务器 Telecommunication GJS03-M15AX-A14-144C-NABS02(GP394) Dome Fiber Optic Splice Closure, M 11-14 The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight-through splicing and divergence splicing. This product has high strength mechanical properties, high sealing performance, corrosion resistance, excellent weather resistance, etc., multi-cable port management, can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and fast construction operation. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable splice splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is produced by injection molding process of high-quality engineering plastics, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts the single end in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; open the box body without tools; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle. Technical parameters or parameters table 1、Adapted to the ambient temperature: -20℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -20℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure, sawyer, heat blower or spray gun. Parameter table Model: GJS03-M14AX-RS-144C(GP374) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-20mm; small hole: 10-30mm Number of cable entry ports: 2+8 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: No Sealing method: mechanical + heat shrink seal Fiber into the end type and number: SC/24 Product use environment: overhead, pipeline, buried 点击下载产品手册 相关产品 1/5 GJS03-M15BX-A14-144C-NABS02(GP394) Dome Fiber Optic Splice Closure, M 11-14 1/6 GJS03-M15BX-A14-144C(GP394) Dome Fiber Optic Splice Closure, M 11-14 1/4 GJS03-M15AX-A14-144C(GP394) Dome Fiber Optic Splice Closure, M 11-14 1/6 GJS03-M14AX-JX-144C(GP374) Dome Fiber Optic Splice Closure, M 11-14

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GJS03-M10AX-JX-432C(GP318) The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight-through splicing and divergence splicing. The product has the characteristics of high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc. It can be mechanically repeatedly opened, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、high-capacity splicing, to meet the trunk or special fiber optic cable splicing protection; 7、 termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure. Parameter table Model: GJS03-M10AX-JX-432C(GP318) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 6-20mm Number of cable entry ports: 2+8 Maximum capacity of fusion fiber tray (core): 24 Maximum fusion core (core): 432 (12-core ribbon) Fiber optic residual fiber intake device: Yes Sealing method: Mechanical Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 Pressure-resistant fixtures (hardware fittings) Self-supporting fiber optic cable pressure fixed device, also known as self-supporting cable fixture, is our company's independent research and development of fiber optic cable overhead construction, it is often used in the construction of the end of rural fiber optic cable lines, due to the overhead laying of fiber optic cable construction environment across the country is different and complex, so our company gives a complete set of end of the cable construction program, which contains a variety of models of fiber optic cable fixture, self-supporting cable fixture helps the construction side to shorten the construction period The self-supporting cable fittings can help builders shorten the construction period and save the total project investment. Self-supporting cable fittings are suitable for fixing non-metallic self-supporting fiber optic cables on fiber optic cable poles or shared power poles. It adopts full mechanical reinforcement connection and repeatable loading and unloading method, with simple structure, convenient operation, shorten the construction period and other characteristics. It is a reliable choice of fixing device for fiber optic cable network pole construction. Self-supporting cable fittings are suitable for non-metallic self-supporting center bundle tube outdoor fiber optic cable, the product model is GYFXTC8F. Product Benefits (1) The hoop and steel arm are made of Q235A flat steel covered with anti-corrosion and high-voltage insulating heat-shrinkable material, withstanding voltage up to 10KV, no flying arc, no breakdown; meet all the power poles and communication poles. (2) Fiber optic cable clamps are injection molded with special plastic with anti-aging agent and anti-UV radiation material, with high anti-aging and anti-UV capability and long service life; (3) So the connection fasteners are made of 304 stainless steel, less types, single tool, easy to operate and maintain. (4) The universal steering is made of cast steel parts with chrome-plated surface and axial tension greater than 1000 N. The radial angle of the steering meets 360 degrees and the axial turning angle is 20sh2 degrees. (5) Easy to install and can be operated without special construction training. (6) Steel arm and hoop pressure-resistant layer at 90 degrees temperature, hot melt adhesive does not flow, drip and other phenomena. The peeling strength of steel arm and hoop pressure resistant layer to steel is more than 10ON/2.5cm. (7) Corrosion resistant. All fasteners by salt spray test 72H, no rust, rust spots and other phenomena on the surface. (8) Fiber optic splint axial pulling force - fiber optic splint fastening fiber optic cable, the axial pulling force is greater than 1000N. (9) High dielectric strength. The dielectric strength of the pressure-resistant layer (insulation layer) is greater than 35KV/mm. (10) The volume resistivity of the pressure-resistant layer (insulation layer) is large. (Insulation layer) volume resistivity greater than 1013 Ω-M; surface pressure-resistant layer thickness of not less than 3mm. (11) The product has a simple structure, small load on the load-bearing pole road, high structural strength, and strong rust-proof ability of the fixture, which is suitable for early own pole road. (12) When sharing the rural pole road of the weak power operator, there is no need to hang the steel strand hanging wire and add non-insulated fixtures on the pole road for quick completion, which not only shortens the construction period but also reduces the investment cost. (13) The insulated gold is strong against rust and corrosion, high insulation, suitable for all kinds of specifications of poles and roads, no need for steel stranded wire suspension, simple operation, reliable strength, meeting the rural construction environment under complex conditions, short construction period and low total investment cost. Technical parameters (1) Altitude:H＜3000m (2) Maximum wind speed:40m/s (15-year average maximum at a height of 8m above ground) (3) Maximum ambient temperature:70℃ (4) Minimum ambient temperature:-40℃ (5) Maximum monthly average relative humidity:95% (6) Maximum daily temperature difference: 40℃ (7) Solarity: 0.1w/cm2 (wind speed is 0.5m/s) 8、Thunderstorm days:220 days/year. Product Type (01) 135 degree insulation and pressure-resisting fixture mainly used for 90-150 degree line corners on the pole, the fixture clamps and steel arms are fully insulated and plastic-coated, so they can be used not only on traditional communication poles, oil and wood poles, but also on power poles. The hoop and steel arm adopt full hard connection, which can effectively and firmly support the erection of the line, the two ends of the universal cable clamps, can freely adjust the direction of the optical cable in and out, the middle stainless steel hooks, can store the tray stay optical cable, can also be used as a position guide to support the optical cable. (02) 180 degree insulation and pressure fixing device 180 degree fixture and 90 degree fixture principle function and 135 degree is the same, but the steel arm of the fixture a no angle, a 90 degree angle, 180 degree in the universal cable fixture can be achieved with a small angle cable turning transition, the specific data: 180 ° ± 20 °. 90 degree fixture can be made to achieve a smaller angle cable turning. (03) 90 degree insulation pressure fixing device (04) Lead down the steel arm insulation voltage fixing device It is a matching component in the new line program, can not be used alone; it is generally used in conjunction with the fixture with hoop hooks, such as 135 degrees, 180 degrees, 90 degrees, etc. (05) Single / double hanging insulation voltage fixing device double hanging wire fixture is similar to the traditional iron accessories double hanging wire hoop, in our company's solutions are mainly used in straight lines, short distance pole line, hoop outer layer also do insulation anti-corrosion treatment, hoop each end is equipped with a cable universal fixture, can be bi-directional overhead fiber optic cable, the product is small, simple, easy to transport and carry. Double hanging self-supporting fixture Single hanging self-supporting fixture (06) Box holding bar pressure resistant fixing device (07) Pulling wire insulation voltage fixing device Pulling wire fixture is a universal soft hanging fixture for all poles, no matter with or without corner, it is composed of insulation hoop, flexible steel rope ring and pulling wire fixture, the product itself is lighter and more portable than several other pole insulation fixtures. (08) Line fixing device clips composed of multiple line clips stacked on top of each other, the product itself does not support the fiber optic cable, does not bear the tension of the fiber optic cable, but only a wall cable management, control the overall wiring aesthetics of the product, similar to the traditional wiring method of U-clip. Two line clips are composed of two half-pieces, one side of a cable hole, can simultaneously manage two fiber optic cables, triplex is composed of three half-pieces, can manage four fiber optic cables, and so on. (09) Over-the-wall pressure-resistant fixture It is composed of wall bracket, flexible steel rope ring and cable pulling fixture, its main role is to use when the wall transition, due to the wall laying of fiber optic cable throughout the line fixed device to manage the line, and the line fixed device itself does not bear the cable pull, so the introduction of over-the-wall fixture, in the introduction of fiber optic cable led out of the wall to ensure that there is sufficient support to support the cable, along the wall large Angle corner can also be used to protect the cable from damage by the wall corner. (10) edge cable pulling fixing device 主要用于敷设光纤的一种固定装置,适用于乡村宽带网络.可搭配光缆引下、行线固定装置等组件；具有辅助非金属自承式轻型光缆的免钢绞线架设、固定等作用，具有长效的防腐、耐压、抗拉等功效。 8F钢带抱箍尺寸( 单位为毫米 ) (11) Fiber optic splint self-supporting fiber optic cable fixture using fiber optic splint can be optional, there are single slot and double slot two types, as the name implies, single slot can only be fixed 1 "8" fiber optic cable, double slot can be fixed 2, splint installation can be through the ball or direct installation, ball transition installation can achieve free steering, direct installation The direct installation can not, such as lead down steel arm fixture. Single-slot plywood Double-slot plywood Product Use Self-supporting fiber optic cable fitting is mainly used for laying fiber optic cable, a fixed device, suitable for rural broadband network; suitable for all kinds of shared power poles, wooden poles to set up fiber optic cable; product structure is simple, easy to use, is a reliable choice for network construction of a fixed device. Product Application Tools Fiber optic fusion machine, movable wrench, hexagonal wrench, knife, tape measure, vise, loose sleeve stripping pliers, optical cable stripping pliers, optical power meter, level meter, impact drill, ladder, threader, hand pull hoist, scissors, foot buckle, safety belt, insulated gloves, safety helmet, etc. Frequently Asked Questions Is the self-supporting fiber optic cable fitting applicable to all fiber optic cables, or some, please list? Self-supporting cable fittings are suitable for non-metallic self-supporting center bundle tube type outdoor fiber optic cable, the product model is GYFXTC8F. What are the advantages of self-supporting fiber optic cable fittings and ordinary fiber optic cable construction? With full mechanical reinforcement connection and repeatable loading and unloading method, it has the advantages of simple structure, easy operation, shortening construction period and less investment, etc. The main force arm of the fixture and the outer surface of the fiber optic cable clamping parts are insulated and pressure resistant, which has a safer insulation and pressure resistance effect. What scenarios are self-supporting fiber optic cable fittings applicable to? Suitable for rural broadband network fiber optic cable end overhead construction; suitable for all kinds of power poles, wooden poles, walls, etc. laying fiber optic cable scenarios, especially suitable for the use of existing non-fiber optic cable pole scenarios; products have a variety of angle models to choose from, fiber optic cable clevis design for universal joints can be applied to a variety of turns and uneven cable alignment scenarios. 上一个产品 下一个产品

产品详情 全部 通信 终端和服务器 通信 GJS03-M6AX-96C-I(GP339) 帽式光缆接头盒, M6 该产品适用于室外光缆架空、管道等直通接续和分歧接续，本产品具有高强度机械性能、高密封性能、耐腐蚀性强、耐候性优异等特点，可机械重复开启，可维护性高；结构布局合理，施工操作简单快捷。 应用场景 室外架空、管道等普通光缆接头接续，可用于城区或城乡普通光纤网络接续保护。 性能特点： 1、壳体采用优质工程塑料注塑工艺生产、添加有抗紫外线、耐老化助剂，机械强度高； 2、盒体采用单端进出光缆设计结构、便于架空挂杆等安装且筒体可快速开启进行检修和维护；开启盒体无须工具； 3、壳体与底部采用硅橡胶密封圈、光缆口利用耐温热缩管密封，气密性良好； 4、盒体具备电气断开或连通功能，可选配气嘴。 技术参数 1、适应环境温度：-20℃~+65℃。 2、大气压力：70~106Kpa。 3、轴向拉力：〉8000N/1min以上。 4、压扁：盒内充入40±5kpa气压，应能承受2000N/100mm横向均布压力，加力时间不小于1ｍｉｎ，试验后接头盒不漏气、无变形、无损伤。 5、冲击：光缆接头盒应能承受落高1m、钢球质量1.0Kg，冲击次数为3次的冲击。 6、弯曲：光缆接头盒与光缆接合处应能承受弯曲张力负荷为150N、弯曲角度±45°的10个循环的弯曲。 7、扭转：光缆接头盒应能承受扭矩不小于50N·m，扭转角度±90°，共10次循环的扭转。 8、跌落：光缆接头盒应能承受2m高度3次的跌落，试验后接头盒不漏气、无变形、无损伤。 9、抗拉力：〉1000N/10cm2压力，时间1min。 10、震动：接头盒承受振动频率为10Hz、振幅为±3mm、振动次数为106的振动，其光纤附加损耗变化值不超过0.2dB; 11、温度循环：-20℃~+65℃，内部气压40(+5)Kpa,循环次数10次， 常温后气压下降不超过5kpa。 12、光纤曲率半径>30mm,光纤熔接盘附加衰耗≤0.01dB。 施工常用工具 十字改刀、热风机或喷枪、锯工、卷尺。 参数表 型号：GJS03-M6AX-96C-I(GP339) 盒体材质：PP 适应光缆直径：椭圆孔：10-20mm；小孔：6-16mm 入缆口数：2+4 熔纤盘最大容量(芯）：24 最大熔接芯数(芯）：96 光纤余纤收容装置：是 密封方式：机械+热缩密封 光纤成端类型及数量：--- 产品使用环境：架空、管道、地埋 点击下载产品手册 相关产品 1/5 GJS03-M6AX-48C(GP223) 帽式光缆接头盒, M6

产品详情 全部 通信 终端和服务器 终端和服务器 室外防水方型落地支架Z1-4 人脸识别一体机 产品适用场景 小区、校园出入口等。 产品特点 防水、防风、易安装、金属材质。 产品关键参数 产品安装事例 点击下载产品手册 相关产品

产品详情 全部 通信 终端和服务器 Telecommunication GJSO3-M2AX-24~144C-SRZJ14(GP262) Dome Fiber Optic Splice Closure, M 2 The product is suitable for outdoor optical cable overhead, pipeline and other straight-through splicing and divergence splicing. The product has the characteristics of high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc. It can be mechanically repeatedly opened, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、Multi-divergent structure design with 2-in and 8-out multi-optical cable management; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M1AX-144C(GP200) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 6-25mm Number of cable entry ports: 2+4 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: No Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 点击下载产品手册 相关产品 1/4 GJS03-M2AX-A8-144C (GP1418) Dome Fiber Optic Splice Closure, M 2 1/4 GJS03-M2AX-A8-24~96C-W21(GP1402) Dome Fiber Optic Splice Closure, M 2 1/4 GJS03-M2AX-A8, SC-24 24~72C-D (GP253) Dome Fiber Optic Splice Closure, M 2 1/3 GJS03-M2AX-A8-24~96C-N08(GP241) Dome Fiber Optic Splice Closure, M 2

产品详情 全部 通信 终端和服务器 通信 绝缘耐压固定装置（金具） 钣金 自承式光缆耐压固定装置，又称为自承式光缆金具，是我们公司自主研发的光缆架空施工，它常用于乡村光缆线路末端的建设，由于光缆架空敷设中全国各地建设环境不一且复杂，故我们公司给出了一整套末端光缆建设方案，其中包含各种型号的光缆金具，自承式光缆金具有助于建设方缩短工期，节约工程总投资。 自承式光缆金具适用于光缆线杆或共享共用的电力杆上非金属自承式光缆的固定。采用全机械加固连接和可重复装卸方式，具有结构简单，操作方便，缩短工期等特点。是光缆网络杆路布建可靠选择的一款固定装置。 自承式光缆金具适用于非金属自承式中心束管式室外光缆，产品型号为GYFXTC8F。 产品优点 (1) 抱箍、钢臂采用Q235A扁钢包覆防腐、耐高压绝缘热缩材料，耐电压达10KV，无飞弧、不击穿；满足所有电力杆路和通信杆路使用。 (2) 光缆夹具采用特殊塑料添加抗老化剂和抗紫外线辐射材料注塑成型，具有高抗老化和抗紫外线能力，使用寿命长； (3) 所以连接紧固件都采用304不锈钢材质制成，种类少，工具单一，操作维护方便。 (4) 万能转向采用钢件铸成，表面镀铬，轴向拉力大于1000N。转向器径向角度满足360度，轴向转角20士2度。 (5) 安装方便，不需要特殊施工培训即可操作。 (6) 钢臂及抱箍耐压层在90度温度下，热熔胶不流淌、滴落等现象。钢臂及抱箍耐压层对钢的剥离强度大于10ON/2.5cm。 (7) 耐腐蚀。所有紧固件经盐雾试验72H，表面无锈蚀、锈斑等现象。 (8) 光缆夹板轴向拉拔力—光缆夹板紧固光缆后，轴向拉力大于1000N。 (9) 介电强度高。耐压层（绝缘层）介电强度大于35KV/mm。 (10) 耐压层（绝缘层）体积电阻率大。绝缘层）体积电阻率大于1013Ω·M；表面耐压层厚度不小于3mm。 (11) 产品结构简单、对承载杆路的负荷小、结构强度高、金具防锈蚀能力强，宜适用于早期自有杆路。 (12) 共享弱电运营商农村杆路时，无需加挂钢绞线吊线，在杆路上加装非绝缘金具，即可快速竣工，既缩短施工工期，又降低投资成本。 (13) 绝缘金具防锈蚀能力强，绝缘性高，适用于各种规格杆路，无需钢绞线吊线，操作简单，强度可靠，满足复杂条件下的农村施工环境，施工工期短，总投资成本低。 技术参数 (1) 海拔高度:H＜3000m (2) 最大风速:40m/s（离地面8米高处15年一遇10分钟平均最大值) (3) 最高环境温度:70℃ (4) 最低环境温度:-40℃ (5) 最大月平均相对湿度:95% (6) 最大日温差: 40℃ (7) 日照量: 0.1w/cm2(风速为0.5m/s)8、雷暴日:220日/年。 产品类型 (01) 135度绝缘耐压固定装置 主要用于杆路上90-150度的线路转角时使用，金具抱箍及钢臂采用全绝缘包塑，因此不仅可以使用在传统通信杆路、油木杆，也可以借用电力杆使用。抱箍及钢臂采用全硬连接，能有效牢固的支持线路的架设，两端万向光缆夹具，能自由调节光缆进出方向，中间不锈钢挂钩，可以储存盘留光缆，也可以作为位置导向支撑光缆。 (02) 180度绝缘耐压固定装置 180度金具和90度金具原理功能和135度相同，只是金具钢臂一个没有夹角，一个呈90度夹角，180度在万向光缆夹具的配合下可以实现小角度光缆转弯过渡，具体数据为：180°±20°。90度金具则可使实现更小角度的光缆转向。 (03) 90度绝缘耐压固定装置 (04) 引下钢臂绝缘耐压固定装置 是新线路方案中的一个配套组件，不能单独使用；它一般情况下是配合有抱箍挂钩的金具使用，如135度、180度、90度等。 (05) 单/双吊绝缘耐压固定装置 双吊线金具类似于传统铁附件双吊线抱箍，在我们公司的解决方案中主要应用于直线、短距离的杆线路中，抱箍外层也做了绝缘防腐处理，抱箍两端各装有个一光缆万向夹具，可以双向架空光缆，本产品小巧、简单，便于运输携带。 双吊自承式金具 单吊自承式金具 (06) 箱体抱杆耐压固定装置 (07) 拉线绝缘耐压固定装置 拉线金具是通用所有杆路的软吊金具，无论有转角或是无转角都可以使用，它是由绝缘抱箍、柔性钢绳环和拉线夹具组成，产品本身比其他几种杆路绝缘金具更轻巧便携。 (08) 行线固定装置夹 由多个行线夹板叠加组成的，产品本身不支撑光缆，不承受光缆的拉力，只是一个墙面线缆管理，控制整体布线美观的产品，类似于传统布线方式的U型夹。两联装行线夹由两个半片组成，一边一个光缆孔，可以同时管理两根光缆，三联装则由三个半片组成，可以管理四根光缆，以此类推。 (09) 过墙耐压固定装置 是由墙面支架、柔性钢绳环和拉线夹具组成，它的主要作用是墙面过渡时使用，由于光缆墙面敷设时全程是行线固定装置来管理线路，而行线固定装置本身又不承受光缆拉力，因此引入过墙金具，在光缆引入引出墙面的时候以保证有足够的支撑力来支撑光缆，沿墙大角度转角时也可以借用过墙金具来保护光缆不被墙角损坏。 (10) 楔形光缆拉线固定装置 主要用于敷设光纤的一种固定装置,适用于乡村宽带网络.可搭配光缆引下、行线固定装置等组件；具有辅助非金属自承式轻型光缆的免钢绞线架设、固定等作用，具有长效的防腐、耐压、抗拉等功效。 8F钢带抱箍尺寸( 单位为毫米 ) (11) 光缆夹板 自承式光缆金具使用的光缆夹板可以进行选配，有单槽及双槽两种型号，顾名思义，单槽只能固定1根“8”字光缆，双槽则可以固定2根，夹板的安装可以通过球头或直接安装，球头过渡安装可以实现自由转向，直接安装则不能，如引下钢臂金具。 产品用途 自承式光缆金具主要用于敷设光缆的一种固定装置,适用于乡村宽带网络；适用于各类共享电力电杆、木杆架设光缆；产品结构简单，使用方便，是网络建设可靠选择的一种固定装置。 产品应用工具 光纤熔纤机、活动扳手、内六角扳手、改刀、卷尺、老虎钳、松套管剥皮钳、光缆剥皮钳、光功率计、水平仪、冲击钻、梯子、穿线器、手拉葫芦、剪刀、脚扣、安全带、绝缘手套、安全帽等。 常见问题解答 自承式光缆金具是适用所有光缆，还是部分，请列举？ 自承式光缆金具适用于非金属自承式中心束管式室外光缆，产品型号为GYFXTC8F。 自承式光缆金具与普通光缆施工有什么优势？ 采用全机械加固连接和可重复装卸方式，具有结构简单，操作方便，缩短工期、投资少等优势，金具主要的力臂以及光缆夹持部件外表面都是绝缘耐压的，具有更加安全的绝缘耐压效果。 自承式光缆金具适用于什么场景？ 适用于乡村宽带网络光缆末端架空施工；适用于各类电力电杆、木杆、墙壁等敷设光缆场景，特别适合利用既有非光缆线杆的场景；产品有各种角度型号可选，光缆夹头设计为万向节可以适用各种转弯和高低不平的光缆走线场景。 点击下载产品手册 相关产品 1/4 综合机柜 钣金 1/14 光缆终端盒 钣金 1/2 移动智慧厕所 钣金 1/1 一体化熔纤盘 钣金

产品详情 全部 通信 终端和服务器 Telecommunication GJSO3-M1AX-SC-24 24~48C(GP294) Dome Fiber Optic Splice Closure, M 1 The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight splicing and divergence splicing, and with fiber into the end and fiber jumping device; the product has high strength mechanical properties, high sealing performance, corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、 with fiber into the end and patching, the number of ports: maximum 24 cores; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、 flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、 bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、 vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M1AX-144C(GP200) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 6-25mm Number of cable entry ports: 2+4 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: No Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 点击下载产品手册 相关产品 1/3 GJS03-M1AX-A8-144C-W30(GP1416) Dome Fiber Optic Splice Closure, M 1 1/3 GJS03-M1AX-A8,SC-24 24-72C-D(GP297) Dome Fiber Optic Splice Closure, M 1 1/3 GJS03-M1AX-A8-24-96C-N08(GP218) Dome Fiber Optic Splice Closure, M 1 1/4 GJS03-M1AX-A8-24~96C(GP204) Dome Fiber Optic Splice Closure, M 1