Fiber Optic Distribution Frame (ODF/MODF)

Short Description:


Product Detail

Product Tags

Features

High quality cold rolled sheet forming, electrostatic powder spraying technology, smooth surface, not east to rust.

High strength sheet metal, long-term using is not easy to deformation.

The edges of metal parts are designed with rounded corners to avoid damage to cables.

The bottom plate is designed with sliding design, for the patch panel already installed on the cabinet, the wiring can be adjusted without removing the patch panel.

Installation instruction

• Preparation before installation
A. Check the structure and type of fiber cables before installation; different fiber cables could not be spliced
together;
B. Seal well the connective components to reduce additional loss to fibers caused by dampness; don’t apply
any pressure on the connective components;
C. Keep a dry and dustless working environment; don’t apply any external force to the cables; don’t bend or
entwine cables;
D. Appropriate tools should be used for splice of cables according to the local standards during the whole
installation process.

• The installation procedure of the box
A. Open the front cover of the box or the top (if necessary), take down the fiber splice tray; let in the fibers
from the fiber entry and fix them on the box; the devices for fixation are as follows: the adjustable collet,stainless fiber cable ring & nylon tie;
B. The fixation of steel core (if necessary): thread the steel core through the fixed device (optional) and screw
down the bolt;
C. Leave about 500mm-800mm long spare fibers from the peeled point of fiber cable to the entrance of the
splice tray, cover it with plastic protective tube, fix it with plastic tie at the T type holes; splice fibers as
usual;
D. Store the spare fibers and pigtails, plug the adapters in the slots on the tray; or first plug in the adapters and
then store the spare fibers, please pay attention to the direction of coiling fibers
E. Cover the splice tray, push in the splice tray or fix it with the slot at the edge of the box;
F. Install the box inside 19” standard mounting equipment.
G. Connect the patch cord as usual.


  • Previous:
  • Next:

  • Write your message here and send it to us